23 Free Crochet Christmas Nutcracker Patterns to Save for Your Next Project

Looking for a free crochet nutcracker pattern for Christmas? These 23 projects range from small ornaments and flat appliqués to standing soldiers, a stocking and decorations for the table.
Choose by where the finished nutcracker will go. A two-panel ornament needs a secure hanging loop, while a freestanding figure needs a firm, level base. The project summaries help you find a construction style that suits your plans.
For more ideas that build on this collection, explore Christmas crochet appliqué patterns.
Before You Start
These patterns use US crochet terminology. Check the yarn weight and hook size given for your chosen project before starting, especially if you plan to swap yarn. A different yarn can change the size and firmness of a stuffed figure or fitted cover.
Decide whether your nutcracker needs to stand, hang or lie flat. Firm fabric and a level base matter for standing figures. Ornaments need a secure loop, while appliqués and bookmarks benefit from a neat back with ends woven in.
Take measurements early for the hand puppet, bottle cover, mug cosy and tree topper. Compare them with the intended object as you work, rather than relying on a finished size alone. If you are making a coaster, keep raised facial details away from the area where the cup will sit.
Crochet terminology: This article uses US crochet terms. Check the abbreviations for each project.
Standing Nutcracker Soldier

This traditional nutcracker soldier brings a familiar Christmas character to a shelf or mantelpiece. His red coat, navy trousers, tall dark hat and pointed white beard give him a recognisable silhouette, while separate limbs add shape without making the design overly detailed.
The figure is built from a stuffed body with individually made arms and legs, so it suits crocheters who are comfortable joining pieces and keeping a firm, even fabric. Embroidered features give the cream face its expression, and simple coat decoration adds the look of a uniform.
A standing soft toy needs more than firm stuffing: its weight must also rest on a level surface. Here, lightly filled boots sit on an enclosed, reinforced crochet base to help keep the soldier upright. It is still best displayed on a flat surface where it will not be easily knocked over.
Standing Nutcracker Soldier

Quick-reference card. Follow the complete written instructions below.
Materials
- DK cotton or cotton-blend yarn: Red, navy, cream, white and black; small amounts of gold for coat details and dark yarn for the face
- Crochet hook: 3 mm, or a size that makes a firm fabric without gaps
- Toy stuffing: For the body, limbs and a small amount in each boot
- Plastic canvas: One blunt-edged circle approximately 5 cm across, enclosed inside the base
- Notions: Stitch marker, yarn needle, scissors and pins
Size and Fit
One decorative size. At the stated gauge, approximately 24 cm tall, including the hat. The enclosed base is approximately 6.5 cm across. Dimensions are estimates, not measured results.
Gauge
Approximately 24 sc and 26 rounds per 10 cm in firm single crochet before stuffing. Exact gauge is less important than a dense fabric that holds the stuffing.
Abbreviations
US crochet terms.
- ch = chain
- sc = single crochet
- inc = 2 sc in the same stitch
- dec = single crochet 2 stitches together
- st(s) = stitch(es)
- R = round
Pattern
- Before you begin Work all rounds in a continuous spiral unless directed otherwise. Mark the first stitch of each round. Make colour changes in the last pull-through of the preceding stitch. Leave long tails on separate pieces for sewing.
- Body and head With navy, R1: 6 sc in a magic ring (6). R2: inc around (12). R3: (sc, inc) 6 times (18). R4: (2 sc, inc) 6 times (24). R5: (3 sc, inc) 6 times (30). R6: (4 sc, inc) 6 times (36). R7â13: sc around (36). Change to red. R14â27: sc around (36). Change to cream. R28â34: sc around (36). R35: (4 sc, dec) 6 times (30). R36: (3 sc, dec) 6 times (24). R37: (2 sc, dec) 6 times (18). Stuff the lower body and head firmly, keeping the bottom level. R38: (sc, dec) 6 times (12). R39: dec around (6). Fasten off, pass the tail through the remaining front loops and draw closed.
- Legs â make two With navy, R1: 6 sc in a magic ring (6). R2: inc around (12). R3â11: sc around (12). Stuff firmly, particularly at the closed lower end. Fasten off, leaving the upper opening and a long sewing tail. Sew the two upper openings beneath the body across its bottom rounds, placing them side by side with a small gap.
- Arms â make two With red, R1: 6 sc in a magic ring (6). R2: inc around (12). R3â11: sc around (12). Change to cream. R12â13: sc around (12). Stuff lightly. R14: dec around (6). Fasten off and draw the hand closed. Sew the closed red ends to opposite sides of the coat at approximately R25â26, with the cream hands pointing down.
- Boots â make two With black, ch 9. R1: starting in the second ch from the hook, work 7 sc along the chain, 3 sc in its last ch, 6 sc along the underside, and 2 sc in the first ch worked (18). R2â4: sc around (18). Add only a little stuffing so the lower surface stays flat. Flatten the open end and work 9 sc through both layers to close it. Fasten off. Lay each boot horizontally, with its closed edge at the toe, and sew the closed lower end of a leg securely to the top of each boot, slightly towards the heel.
- Hat With black, R1: 6 sc in a magic ring (6). R2: inc around (12). R3: (sc, inc) 6 times (18). R4: (2 sc, inc) 6 times (24). R5: (3 sc, inc) 6 times (30). R6: (4 sc, inc) 6 times (36). R7â14: sc around (36). R15: (sc, inc) 18 times (54). R16: sc around (54). Fasten off. The closed end is the flat top; the final two rounds form the brim. Place the hat over the top of the head and sew the brim in place around approximately R33â34.
- Beard With white, ch 9. Row 1: sc in the second ch from the hook and each remaining ch (8); turn. Row 2: ch 1, dec, 4 sc, dec (6); turn. Row 3: ch 1, dec, 2 sc, dec (4); turn. Row 4: ch 1, dec twice (2); turn. Row 5: ch 1, dec (1). Fasten off. Sew the eight-stitch upper edge beneath the face at approximately R29, leaving the point to hang over the upper coat.
- Reinforced standing base Make two black discs. For each: R1: 6 sc in a magic ring (6). R2: inc around (12). R3: (sc, inc) 6 times (18). R4: (2 sc, inc) 6 times (24). R5: (3 sc, inc) 6 times (30). R6: (4 sc, inc) 6 times (36). R7: (5 sc, inc) 6 times (42). R8: (6 sc, inc) 6 times (48). Fasten off. Place the plastic-canvas circle between the discs and sew their edges together, fully enclosing it. Sew both boot undersides securely to the top disc, side by side and centred, so the soldier stands upright.
- Face and coat details Before fixing the hat, embroider two small dark eyes on the cream face at approximately R31, about five stitches apart. Add a small nose at approximately R30 above the beard. With gold yarn, embroider two straight vertical lines down the front of the red coat and short horizontal bars between them. Keep embroidery ends inside the stuffed fabric.
Finishing
- Check that the legs hang evenly and both boot undersides sit flat against the reinforced base; adjust the sewing before securing the tails.
- Weave in all remaining ends securely. Shape the hat and beard by hand.
Helpful Tips
- Firm stuffing in the body and legs helps prevent leaning, but leave the boots lightly filled so their undersides remain level.
- Use the enclosed base rather than loose weights. A tall soft figure may still need support on an uneven or easily disturbed surface.
- Keep the hat brim above the eyes and position the beard below the nose before sewing either piece down.
Flat Nutcracker Appliqué

This flat nutcracker brings a festive character to a stocking, gift bag or plain fabric decoration without the bulk of a stuffed figure. Its separate shapes create a crisp silhouette that is easy to recognise at a glance.
The cream face sits between the red coat and navy hat, while the tapered white beard covers the lower face and the boots peek out beneath the coat. Seeing the pieces together before attachment helps you judge the overall outline and keep the figure looking upright.
Small embroidered features and coat buttons give the appliqué its expression without making it noticeably thicker. It is particularly suited to a clear area of fabric where the hat, coat and boots can all be seen.
Flat Nutcracker Appliqué

Quick-reference card. Follow the complete written instructions below.
Materials
- Smooth DK cotton yarn: Small amounts of red, cream, navy, white and black, plus a little gold or yellow for the buttons
- Crochet hook: 3 mm, or a size that makes a firm fabric
- Tapestry needle and scissors: For assembly, embroidery and finishing
Size and Fit
One size: approximately 6 cm wide and 13 cm tall at the stated gauge. The coat is 12 stitches wide; the face and hat are centred above it. The finished figure is intended to lie flat against a fabric item.
Gauge
Approximately 20 sc and 22 rows per 10 cm in flat single crochet. Exact gauge is not essential, but it will change the finished size.
Abbreviations
US crochet terms.
- ch = chain
- sc = single crochet
- sc2tog = single crochet two stitches together; counts as one stitch
- st(s) = stitch(es)
Pattern
- Before you begin Work all pieces flat in rows. A turning ch 1 does not count as a stitch. Make the coat, face, hat, beard and two boots separately; do not join pieces while crocheting.
- Red coat Ch 13. Row 1: Sc in the second ch from the hook and in each remaining ch â 12 sc. Rows 2â16: Ch 1, turn, sc in each st â 12 sc. Fasten off.
- Cream face Ch 9. Row 1: Sc in the second ch from the hook and in each remaining ch â 8 sc. Rows 2â7: Ch 1, turn, sc in each st â 8 sc. Fasten off.
- Navy hat Ch 11. Row 1: Sc in the second ch from the hook and in each remaining ch â 10 sc. Rows 2â5: Ch 1, turn, sc in each st â 10 sc. Fasten off.
- Two black boots Make two alike. For each boot, ch 5. Row 1: Sc in the second ch from the hook and in each remaining ch â 4 sc. Rows 2â4: Ch 1, turn, sc in each st â 4 sc. Fasten off.
- White beard Ch 7. Row 1: Sc in the second ch from the hook and in each remaining ch â 6 sc. Row 2: Ch 1, turn, sc2tog, sc in each of the next 2 sts, sc2tog â 4 sc. Row 3: Ch 1, turn, sc2tog twice â 2 sc. Fasten off. The 6-stitch edge is the top of the beard; the 2-stitch edge is its tip.
- Embroider the details Before assembly, embroider three small gold or yellow buttons down the centre of the coat, around rows 4, 8 and 12, counting from its bottom edge. On the face, embroider two small black eyes around row 5 and a short mouth around row 4, counting from its bottom edge. Keep the stitches small enough to leave room for the beard below the mouth.
- Arrange and sew Lay the coat upright with its row 1 at the bottom. Centre the face over the coat, overlapping face row 1 with coat row 16; the face is narrower than the coat. Centre the hat above the face, overlapping hat row 1 with face row 7. Place the beard on the lower face with its 6-stitch edge across approximately face row 3 and its narrow tip pointing towards face row 1. Position the boots beneath the coat with each bootâs row 4 overlapping coat row 1: one boot beneath coat stitches 2â5 and the other beneath stitches 8â11. Check the arrangement, then sew the overlapping areas together with matching yarn. Sew around loose edges where needed to stop them lifting, without pulling the pieces out of shape.
Finishing
- Weave yarn ends into the appliqué layers so the back remains as flat as possible.
- Place the assembled nutcracker on the stocking, bag or decoration. Sew around its outer edges with matching thread or yarn, securing any corners that lift.
Helpful Tips
- Use small securing stitches rather than bulky knots behind the figure, especially if sewing it onto thin fabric.
- Pin or tack all the pieces in position before sewing so the centred hat, face and gap between the boots stay aligned.
Tapestry Crochet Nutcracker Square

This nutcrackerâs red hat, cream face and angular dark moustache are built into the fabric rather than attached as an appliqué. Its blocky silhouette gives the small motif a clear, graphic look, while the plain contrasting border frames it neatly.
The chart presents the design as seen from the front, so its reading direction changes on alternate rows. The tiniest facial details are embroidered separately, keeping the colourwork chart easier to follow.
With tapestry crochet, unused yarn can sit inside the stitches until it is needed again. Keep those strands relaxed so they do not draw in the fabric, and take particular care behind the pale face to help prevent darker yarn showing through. The finished square would work well in a festive panel or alongside other colourwork squares.
Tapestry Crochet Nutcracker Square

Quick-reference card. Follow the complete written instructions below.
Materials
- DK cotton yarn: Small amounts of navy (B, background), red (R, hat), cream (C, face), black (D, moustache and embroidery) and gold (G, border). Smooth, firm yarn helps the chart read clearly.
- Crochet hook: 3.5 mm, or a size that produces firm stitches without pulling the square out of shape.
- Notions: Tapestry needle, scissors and stitch markers if desired.
Size and Fit
One 17-stitch by 17-row image, with one border round. At the suggested gauge, expect a square approximately 9.5 cm across after edging; your yarn and tension may change the finished size.
Gauge
Aim for approximately 20 single crochet stitches and 20 rows per 10 cm. Exact gauge is not essential, but stitches should be firm enough to conceal carried strands.
Abbreviations
US crochet terms.
- ch = chain
- sc = single crochet
- st(s) = stitch(es)
- RS / WS = right side / wrong side
- B, R, C, D, G = navy background, red, cream, black and gold yarn, respectively
Pattern
- Before you begin The chart shows the square as viewed from the RS, with one letter representing one sc. Start at the bottom. Read odd-numbered rows from left to right and even-numbered rows from right to left. Ch 1 at each turn; turning chains never count as stitches.
- Start and colour changes With B, ch 18. Row 1: sc in the second ch from the hook and in each remaining ch; turn. You have 17 sc. For Rows 2â17, ch 1, then work one sc for each chart letter in reading order; turn after Rows 2â16. To change colour, complete the final yarn-over of the preceding sc with the new colour.
- Complete stitch chart Each line contains 17 letters, printed left to right as seen from the RS. B = navy, R = red, C = cream, D = black.
17 BBBBBRRRRRRRBBBBB
16 BBBBBRRRRRRRBBBBB
15 BBBBRRRRRRRRRBBBB
14 BBBBRRRRRRRRRBBBB
13 BBBRRRRRRRRRRRBBB
12 BBBRRRRRRRRRRRBBB
11 BBBCCCCCCCCCCCBBB
10 BBBCCCCCCCCCCCBBB
09 BBBCCCCCCCCCCCBBB
08 BBBCCCCCCCCCCCBBB
07 BBBCCCCDDDCCCCBBB
06 BBBCCCDDDDDCCCBBB
05 BBBCCCCCCCCCCCBBB
04 BBBBCCCCCCCCCBBBB
03 BBBBBDDDDDDDBBBBB
02 BBBBBBBBBBBBBBBBB
01 BBBBBBBBBBBBBBBBB - Manage carried yarn Where a colour will be used again later in the same row, lay its inactive strand along the tops of the stitches and crochet over it. Keep the strand gently tensioned rather than pulling it tight. The B sections at both ends of a picture row mean B must travel behind the central colourwork. Keep carried yarn towards the WS where possible so it does not show through pale stitches. Join C at Row 4 and R at Row 12; fasten each off after its final row. Join D for Row 3 and fasten it off after that row; rejoin D for Row 6, use it again in Row 7, then fasten it off. Carrying between these separated sections would make unnecessary vertical strands.
- Embroidered eyes After Row 17, use D and a tapestry needle to make one small straight-stitch eye over each of the cream cells at Row 10, columns 7 and 11, counting columns from the left as viewed from the RS. Keep the stitches within their cells and secure the ends on the WS.
- Gold border Fasten off B. Join G at the top-right corner. With the RS facing, work 3 sc in that corner stitch. Work 1 sc in each of the 15 row ends down the right side (Rows 16â2); work 3 sc at the bottom-right corner. Work 1 sc into the underside of each of the 15 middle foundation-chain positions; work 3 sc at the bottom-left corner. Work 1 sc in each of the 15 row ends up the left side (Rows 2â16); work 3 sc in the top-left corner. Work 1 sc in each of the 15 middle stitches of Row 17. Join to the first border sc with a slip stitch and fasten off. The border has 72 sc.
Finishing
- Weave in ends on the WS, taking care not to pull the colourwork out of shape.
- Lightly block the square so its edges lie flat. If displaying it as an ornament or joining it to other squares, attach a hanger or seam only after blocking.
Helpful Tips
- Check every chart row for 17 stitches before turning; changing colour does not add a stitch.
- If a carried strand shows through the cream face, move it towards the WS as you work and avoid pulling the cream stitches tight.
Cone-Shaped Nutcracker Figure

This cone-shaped nutcracker makes a cheerful mantel decoration without the fiddly construction of separate legs. Its broad red coat narrows towards a cream face and dark cap, giving the figure a recognisable soldier silhouette.
The simple shape suits a confident beginner who is comfortable working in the round and changing colours. A separate flat base supports the stuffed body, while the white beard, hat brim and short arms add character without making the figure bulky.
It also makes a lovely addition to a group of crochet Christmas decorations: set it beside a small tree or make several figures for a festive display. As a freestanding figure, it is best placed on a level surface rather than hung as an ornament.
Cone-Shaped Crochet Nutcracker Figure

Quick-reference card. Follow the complete written instructions below.
Materials
- Aran-weight cotton yarn: Approximately 50 g red, 25 g cream, 25 g black or very dark brown, and a small amount of white for the beard. Allow a little extra for sewing.
- Crochet hook: 3.5 mm, or a size that produces firm fabric without gaps.
- Other supplies: Toy stuffing, a stitch marker, a tapestry needle and scissors.
Size and Fit
One size. Approximately 13 cm tall with a base about 7 cm across if you match the suggested gauge. Exact dimensions will vary with yarn and tension.
Gauge
Approximately 16 sc and 18 rounds per 10 cm in firm single crochet. An exact match is less important than fabric that holds the stuffing securely.
Abbreviations
US crochet terms.
- ch = chain
- sc = single crochet
- sc2tog = single crochet two stitches together; one decrease
- sl st = slip stitch
- st(s) = stitch(es)
Pattern
- Before you begin Work the body and base disc in continuous rounds without joining. Place a marker in the first stitch of each round and move it as you work. For colour changes, make the final yarn-over of the preceding round with the new colour.
- Body: starting edge and rounds 1â3 With red, ch 36 and join with a sl st to the first ch, taking care not to twist the chain. Round 1: Sc in each ch around (36). Round 2: Sc in each st (36). Round 3: (Sc in next 4 sts, sc2tog) 6 times (30).
- Body: rounds 4â14 Rounds 4â6: Sc in each st (30 per round). Round 7: (Sc in next 3 sts, sc2tog) 6 times (24). Rounds 8â10: Sc in each st (24 per round). Round 11: (Sc in next 2 sts, sc2tog) 6 times (18). Rounds 12â14: Sc in each st (18 per round). Change to cream at the end of round 14.
- Face and cap: rounds 15â24 Rounds 15â19: With cream, sc in each st (18 per round). Change to black at the end of round 19. Rounds 20â22: Sc in each st (18 per round). Round 23: (Sc in next st, sc2tog) 6 times (12). Round 24: Sc2tog 6 times (6). Fasten off, leaving a tail. Thread the tail through the front loops of the remaining 6 sts and draw the top closed. Secure the tail inside. Leave the bottom open for stuffing.
- Flat base disc With red, make a magic ring. Round 1: Work 6 sc into the ring (6). Round 2: Work 2 sc in each st (12). Round 3: (Sc in next st, 2 sc in next st) 6 times (18). Round 4: (Sc in next 2 sts, 2 sc in next st) 6 times (24). Round 5: (Sc in next 3 sts, 2 sc in next st) 6 times (30). Round 6: (Sc in next 4 sts, 2 sc in next st) 6 times (36). Fasten off with a long sewing tail.
- Hat brim With black, ch 20. Sc in the second ch from the hook and in each remaining ch (19). Fasten off with a long sewing tail. This narrow strip will circle the 18-stitch cap with a one-stitch overlap at the back.
- Beard With white, ch 5. Row 1: Sc in the second ch from the hook and in each remaining ch (4). Turn. Row 2: Sc2tog, sc in each of the next 2 sts (3). Turn. Row 3: Sc2tog, sc in the next st (2). Turn. Row 4: Sc2tog (1). Fasten off with a sewing tail. The 4-stitch starting edge is the top of the beard.
- Arms: make two With red, ch 4. Row 1: Sc in the second ch from the hook and in each remaining ch (3). Turn. Rows 2â6: Ch 1, sc in each of the 3 sts; turn after rows 2â5 only (3 per row). Fasten off with a sewing tail. These are short, flat strips; do not stuff them.
Finishing
- Choose a front opposite the bodyâs starting-chain join. Embroider two small black eyes on face round 18, leaving about four stitches between them. Secure the yarn ends inside.
- Sew the beardâs 4-stitch edge across the centre front of face round 15, beneath the eyes. Let its point hang over the red coat.
- Wrap the hat brim around the junction of face round 19 and cap round 20. Overlap its ends by approximately one stitch at the back, sew the ends together, then tack the strip to the body all around.
- Sew the short starting edge of each arm to opposite sides of the upper red coat at about rounds 8â9. Let the rest of each strip hang free.
- Stuff the cone through its open bottom, filling the top and sides firmly enough to hold their shape. Use less stuffing beside the bottom edge so the base will remain flat.
- Position the 36-stitch outer edge of the base disc against the bodyâs 36-stitch starting edge. Using the discâs long tail, sew them together one stitch to one stitch all around. Check that the disc lies flat before securing the tail.
Helpful Tips
- If stuffing shows between stitches, use a smaller hook rather than adding extra stitches.
- Keep the face and cap colour changes at the back, where the brim can help conceal their stepped edge.
- A level base depends on a flat disc and light stuffing near its seam; avoid pushing a dense wad of stuffing against the centre of the disc.
Two-Panel Nutcracker Ornament

This two-panel nutcracker brings the familiar soldier silhouette to a Christmas tree without the bulk of a fully sculpted figure. Its softly padded, relatively flat shape is suited to branches where a larger decoration might feel crowded.
The square hat, distinct face, red coat and boots make the character recognisable at a glance. Small facial details, a beard and gold-coloured buttons add personality without relying on separate miniature accessories.
It is a satisfying choice for a confident beginner who wants to try a little shaping while keeping the overall construction straightforward. The result has enough character to hang on its own or sit alongside other handmade Christmas ornaments.
Two-Panel Nutcracker Ornament

Quick-reference card. Follow the complete written instructions below.
Materials
- DK cotton yarn: Small amounts of black for the boots and hat, red for the coat, and a skin tone for the face; allow enough of each colour to make two panels.
- Embroidery yarn or spare yarn: White for the beard, black for the eyes and boot division, and gold-coloured yarn for the buttons.
- 3 mm crochet hook: Or a size that makes a firm fabric with no gaps large enough for stuffing to show.
- Other supplies: A small amount of toy stuffing, yarn needle, scissors and stitch markers.
Size and Fit
One sample size. Approximately 9 cm wide and 14.5 cm tall, excluding the hanging loop, when worked at the stated gauge. The finished dimensions are estimates, not measured testing.
Gauge
Target gauge: 20 sc and 22 rows per 10 cm in flat single crochet. Exact gauge is less important than a firm fabric; a different gauge will change the finished size.
Abbreviations
US crochet terms.
- ch = chain
- sc = single crochet
- sc2tog = single crochet two stitches together
- sl st = slip stitch
- st(s) = stitch(es)
Pattern
- Before you begin Make two identical panels, working from the boots upwards. Turn after every row. A turning ch 1 does not count as a stitch. Change colour in the final yarn-over of the last stitch of the preceding row, then cut and secure the old colour.
- Panel: boots, rows 1â3 With black, ch 17. Row 1: Sc in the second ch from the hook and in each remaining ch; 16 sc. Rows 2â3: Ch 1, turn, sc in each st; 16 sc.
- Panel: coat, rows 4â15 Change to red. Row 4: Ch 1, turn, sc in each st; 16 sc. Repeat row 4 for rows 5â15; 16 sc in each row.
- Panel: head, rows 16â23 Change to the skin-tone yarn. Row 16: Ch 1, turn, sc2tog, sc in next 12 sts, sc2tog; 14 sts. Row 17: Ch 1, turn, sc2tog, sc in next 10 sts, sc2tog; 12 sts. Row 18: Ch 1, turn, sc2tog, sc in next 8 sts, sc2tog; 10 sts. Rows 19â23: Ch 1, turn, sc in each st; 10 sc.
- Panel: hat, rows 24â30 Change to black. Row 24: Ch 1, turn, work 2 sc in the first st, sc in next 8 sts, work 2 sc in the last st; 12 sc. Row 25: Ch 1, turn, work 2 sc in the first st, sc in next 10 sts, work 2 sc in the last st; 14 sc. Rows 26â30: Ch 1, turn, sc in each st; 14 sc. Fasten off. Make a second panel in the same way.
- Embroider the front Choose one panel as the front. Stitch two small black eyes on the skin-tone section, clear of the edges. Make a small white beard below them with several vertical stitches; keep all embroidery within the head. Add three gold-coloured stitched buttons down the centre of the red coat, approximately at rows 6, 9 and 12. Stitch a short black vertical line up from the centre of the bottom edge to suggest two separate boots. Secure all embroidery ends on the wrong side.
- Join and stuff Place the panels together with their right sides facing out and all edges aligned. With black, join yarn through both layers at the top-left hat stitch. Sc through both layers as follows: work 3 sc in that corner stitch, 1 sc in each of the next 12 top stitches, and 3 sc in the top-right corner stitch. Work 1 sc through each paired row end down the right side, from row 29 to row 2; 28 sc. Across the foundation edge, work 3 sc in the first boot stitch, 1 sc in each of the next 14 stitches, and 3 sc in the last stitch. Work 1 sc through each paired row end up the left side, from row 2 to row 23; 22 sc. Pause before the final six row ends. Add a little stuffing, spreading it into the boots, coat, head and hat without rounding the panels excessively. Work 1 sc through each of the remaining paired row ends, rows 24â29; 6 sc. Sl st to the first edging sc and fasten off. The edging has 94 sc.
- Hanging loop With black, ch 20 and sl st into the first ch to form a loop. Fasten off, leaving a long tail. Sew the base of the loop securely to the centre of the hatâs top edge, passing the tail through both panels several times. Secure and hide the tail inside the ornament.
Finishing
- Check that the seam is closed and the stuffing is distributed lightly, then weave in any remaining ends.
- Gently flatten the coat and straighten the square hat by hand.
Helpful Tips
- Mark the first and last stitches of a row if the shaping makes them difficult to spot.
- Keep facial stitches small and away from the seam so they remain visible after edging.
- If stuffing shows between stitches, use less stuffing or a smaller hook.
Nutcracker Finger Puppet

This little nutcracker turns a familiar Christmas decoration into a playful finger puppet. His red coat, embroidered expression, white beard and tall dark hat give him plenty of character without relying on bulky embellishments.
The coat, face and hat form one tube, so the bottom must stay open for a finger to slip inside. Only the top of the hat is closed. Once the coat has begun to take shape, try the tube on the intended finger: it should slide on comfortably without pinching or slipping off. If it does not, adjust the starting circumference before working upwards.
The arms and beard sit on the outside of the puppet. When adding those details, keep the inside of the tube clear so the finished nutcracker remains comfortable to wear.
Nutcracker Finger Puppet

Quick-reference card. Follow the complete written instructions below.
Materials
- DK cotton yarn: Small amounts of red, skin tone, dark hat colour and white, plus scraps of black and gold for embroidery.
- Crochet hook: 3 mm, or a size that makes a firm fabric without making the opening too tight.
- Other supplies: Tapestry needle, stitch marker, scissors and a tape measure.
Size and Fit
The sample starts with 16 stitches and is approximately 6.7 cm around and 6 cm tall at the suggested gauge. Measure the intended finger around its widest point. Choose 12, 16 or 20 starting chains for an opening slightly larger than that measurement, then check the fit after Round 3. The opening should slide over the finger comfortably without stretching hard. If it does not, restart with a different multiple of four; do not decrease the coat or face to adjust the fit.
Gauge
Approximately 6 sc and 7 rounds per 2.5 cm in joined rounds. This is a planning guide, not a tested measurement; the fit check takes priority.
Abbreviations
US crochet terms.
- ch = chain
- sc = single crochet
- sc2tog = single crochet two stitches together
- sl st = slip stitch
- st = stitch
- rnd = round
Pattern
- Working method Work joined rounds from the open coat hem upwards. At the end of each rnd, sl st into its first sc and ch 1 before the next rnd; the join and turning ch do not count as stitches. Do not turn. Change colour on the final pull-through of the last sc in the preceding rnd. The counts below are for the 16-stitch sample.
- Coat, Rnd 1 With red, ch 16. Without twisting the chain, sl st into the first ch to form a ring. Ch 1 and sc in each ch, including the ch used for the join. Join as described above. (16 sc)
- Coat, Rnds 2â3 Sc in each st around. (16 sc per rnd) Try the tube over the intended finger now. If the opening pinches or falls off, restart with 12 or 20 starting chains as appropriate; keep that stitch count through the coat, face and straight section of the hat.
- Coat, Rnds 4â6 Sc in each st around. Change to the skin-tone yarn on the last sc of Rnd 6. (16 sc per rnd)
- Face, Rnds 7â10 Sc in each st around. Change to the dark hat yarn on the last sc of Rnd 10. (16 sc per rnd)
- Hat, Rnds 11â15 Sc in each st around. (16 sc per rnd)
- Hat top, Rnd 16 Sc2tog around. (8 sc)
- Hat top, Rnd 17 Sc2tog around. (4 sc) Fasten off with a tail. Thread it through the front loops of the remaining four stitches and pull closed. Secure the tail inside the hat. Leave the coat hem open and do not add stuffing.
- Arms, make two With red, ch 4. Row 1: sc in the second ch from the hook and in each remaining ch. (3 sc) Rows 2â3: ch 1, turn, sc in each st. (3 sc per row) Fasten off, leaving a sewing tail.
- Beard With white, ch 5. Row 1: sc in the second ch from the hook and in each remaining ch. (4 sc) Rows 2â3: ch 1, turn, sc in each st. (4 sc per row) Fasten off, leaving a sewing tail.
Finishing
- Choose a centre front. Sew the beard’s top edge across the lower face at about Rnd 10, letting the rest lie over the coat. Catch down its side edges lightly without stitching through both walls of the tube.
- Sew one short edge of each arm to a side of the coat at Rnds 5â6. Let the arms hang outside the tube; keep all sewing clear of the open hem.
- Embroider two small eyes on Rnd 8, one on either side of the beard. Add short black moustache stitches beside the beard at Rnd 9 and two gold coat-button stitches below it. Keep embroidery tails inside the fabric but out of the finger opening.
- Weave in ends securely. Check that a finger still slips in through the coat hem and that no sewn detail has joined the front and back of the tube.
Helpful Tips
- Mark the first sc of each rnd so the slip-stitch join is not mistaken for a stitch.
- For a different starting count, use a multiple of four. Keep that count through Rnd 15; sc2tog all the way around in each of Rnds 16 and 17, then draw the remaining stitches closed.
- Embroider the expression with short stitches rather than adding beads to a small puppet.
Nutcracker Hand Puppet

This cheerful nutcracker is a hand puppet rather than a decoration. Its red coat, cream face and navy hat give it a recognisable Christmas look, while embroidered features add expression without hard embellishments.
The broad, flat shape leaves room for a hand inside, and the narrow side arms can swing as the puppet moves. It would suit a festive story time or a handmade Christmas gift.
Comfortable fit matters more than a snug silhouette. The pattern includes a hand-width adjustment so you can plan the opening for its intended user rather than relying on the sample size.
Nutcracker Hand Puppet

Quick-reference card. Follow the complete written instructions below.
Materials
- DK cotton yarn: Red for the coat and arms, cream for the face and cuffs, and navy for the hat; small amounts of black and gold for embroidery.
- Crochet hook: 4 mm, or a size that gives a firm fabric while meeting the stated gauge.
- Other supplies: Tapestry needle, stitch markers, scissors and a tape measure.
Size and Fit
Sample size: approximately 13.3 cm wide and 21 cm tall before seaming, with a bottom opening approximately 12.2 cm wide when laid flat after seaming. To size the opening, measure the intended hand flat across its widest point, including the thumb at rest. Add 2 cm of ease for the desired internal opening width, then add approximately two stitch widths for the side seams. At the stated gauge, multiply that total by 1.8 and round up to a whole number of stitches; use that number for both panels. The sample uses a 10 cm hand measurement: 10 + 2 + approximately 1.1 cm for seams = approximately 13.1 cm, or 24 stitches when rounded up. Check the opening around the intended hand before securing the seams.
Gauge
Aim for 18 sc and 20 rows per 10 cm in flat sc. Make a swatch and use your own stitch gauge in the sizing calculation if it differs.
Abbreviations
US crochet terms.
- ch = chain
- sc = single crochet
- st(s) = stitch(es)
Pattern
- Before you begin Work flat in rows. Ch 1 to turn at the end of each row; the turning chain never counts as a stitch. Change colour on the last pull-through of the final sc in the row before the new colour begins. Make two identical panels, keeping their stitch counts and row counts the same.
- First panel: red coat With red, ch 25 for the sample size, or ch one more than your calculated panel stitch count. Row 1: sc in the second ch from the hook and in each ch across; 24 sc for the sample. Rows 2â22: ch 1, turn, sc in each st across. Do not fasten off at the end of Row 22.
- First panel: face and hat Change to cream. Rows 23â34: ch 1, turn, sc in each st across. Change to navy. Rows 35â42: ch 1, turn, sc in each st across. Fasten off, leaving a long navy tail for seaming the top.
- Second panel Repeat Rows 1â42 exactly to make a matching back panel. Fasten off with a long navy tail.
- Arms Make two flat, unstuffed arms. With red, ch 5. Row 1: sc in the second ch from the hook and in each ch across; 4 sc. Rows 2â11: ch 1, turn, sc in each st across. Change to cream. Rows 12â13: ch 1, turn, sc in each st across. Fasten off, leaving a tail at the cream end for tidying. Each arm is approximately 2.2 cm wide and 6.5 cm long at the stated gauge.
- Embroider the face On the right side of one panel, embroider two black eyes across the upper part of the cream section. Add a small nose and a moustache below, leaving the outermost stitch on each side free for the seam. Add a short gold line or simple motif to the navy hat if desired. Secure embroidery ends on the wrong side.
- Join the puppet Place the panels wrong sides together with rows and colour changes aligned. Sew through approximately one stitch width at each side, from the bottom corners up to the hat. Sew across the top. Leave the entire bottom edge open. Before securing the side seams, slip the intended hand inside to check that the opening and interior are comfortable; loosen or adjust the seams if needed.
- Attach movable arms With the cream cuff at the free end, sew one short red edge of each arm to the outside of a finished side seam alongside coat Rows 18â21. Catch the seam and the arm edge without stitching through the puppet opening. Leave the long edges and cuff unattached so each arm can swing at its shoulder.
Finishing
- Weave in all yarn ends, keeping knots and loose strands out of the hand opening.
- Gently flatten the puppet and check that the bottom opening remains unobstructed and both arms move freely.
Helpful Tips
- Mark the first and last stitch of each row to keep the panel edges straight.
- For a different width, change only the foundation stitch count and keep that count constant throughout both panels. Make the panels wide enough for the hand rather than stretching the fabric to fit.
- Embroidered features avoid hard pieces on a puppet intended for play.
Corner-to-Corner Nutcracker Cushion

This Corner-to-Corner Nutcracker Cushion brings a bold, geometric character to Christmas decorating. The graphic front suggests a tall hat, a pale face and a white beard, while the plain back lets the motif stand out on a sofa or favourite chair.
The front uses a colour chart, but its horizontal lines are a map of the finished picture rather than the order in which you crochet. Following the motif across the diagonal fabric is the main challenge, making this an appealing project for crocheters already comfortable with corner-to-corner work and colour changes.
The finished cushion can work as a seasonal accent on its own or alongside other handmade Christmas decorations. Its simple square shape also makes it easy to pair with cushions in different colours and textures.
Corner-to-Corner Nutcracker Cushion

Quick-reference card. Follow the complete written instructions below.
Materials
- Medium-weight yarn: Washable acrylic or wool-blend yarn in navy (N), red (R), cream (C) and white (W). Use the same yarn weight for both panels.
- Crochet hook: 5 mm (US H/8), or a size that gives firm fabric.
- Cushion pad: Choose after measuring the finished panels.
- Notions: Yarn needle, scissors and optional small bobbins for colour changes.
Size and Fit
One size: each panel is 17 corner-to-corner tiles wide and 17 tiles high. Finished dimensions depend on your yarn and tension. Measure a completed panel laid flat; choose a cushion pad approximately the same width, or up to 2 cm wider for a plumper fit. Both panels should measure alike before seaming.
Gauge
No fixed gauge is required. Work both panels with the same hook, yarn weight and tension. The fabric should be firm enough that the cushion pad does not show through.
Abbreviations
US crochet terms.
- ch = chain
- dc = double crochet
- sl st = slip stitch
- RS = right side
- WS = wrong side
- tile = one corner-to-corner block made with a ch-3 and 3 dc
- N, R, C, W = navy, red, cream and white
Pattern
- Read the chart The chart below has 17 horizontal rows, read from top to bottom, with 17 tile positions in each row. A notation such as 5N means five consecutive navy tiles; it is not five stitches. These chart rows locate the colours but are NOT the order of working. Start at chart position (row 1, column 1) and work diagonals 1â33. On diagonal k, use positions whose row number plus column number equals k + 1. Work even-numbered diagonals from the lowest row number to the highest; work odd-numbered diagonals from the highest row number to the lowest.
- Nutcracker chart 01: 5N 7R 5N
02: 4N 9R 4N
03: 3N 11R 3N
04: 3N 2R 7W 2R 3N
05: 3N 2R 7W 2R 3N
06: 4N 9C 4N
07: 3N 11C 3N
08: 3N 2C 1N 5C 1N 2C 3N
09: 3N 11C 3N
10: 3N 5C 1R 5C 3N
11: 3N 11C 3N
12: 3N 5W 1C 5W 3N
13: 3N 4W 1N 1C 1N 4W 3N
14: 4N 9W 4N
15: 5N 7R 5N
16: 4N 9R 4N
17: 3N 11R 3N - Basic corner-to-corner tile For the first tile, ch 6 and work 1 dc in the fourth ch from the hook and in each of the next 2 ch. To add a tile at the start of an increasing diagonal, turn, ch 6 and work 1 dc in the fourth ch from the hook and in each of the next 2 ch. For each subsequent tile on that diagonal, sl st into the next tile’s ch-3 space, ch 3 and work 3 dc in the same space.
- Decrease at an edge After turning for a decreasing diagonal, ch 1 and sl st across the 3 dc of the first tile and into its ch-3 space. Ch 3 and work 3 dc in that space to make the first tile of the new diagonal. Continue across by joining to each next tile’s ch-3 space with a sl st, then working ch 3 and 3 dc in that space. This shortens the diagonal by one tile.
- Front panel With the chart, make diagonals 1â17 by increasing at the start of each diagonal. They contain 1, 2, 3 and so on up to 17 tiles. Then use the decrease method for diagonals 18â33; they contain 16, 15 and so on down to 1 tile. Work each tile in the colour at its chart position. When changing colour, bring in the new yarn before working that tile’s starting chain or joining sl st; secure the old yarn and weave in its end. Do not carry a contrasting strand across large areas. Fasten off.
- Back panel Make a second 17-by-17 corner-to-corner panel entirely in navy. Increase for diagonals 1â17 and decrease for diagonals 18â33 exactly as for the front. Fasten off. Each panel contains 289 tiles.
- Check the panels Weave in ends, lay both panels flat and compare their edges. If necessary, gently shape them to matching square dimensions without stretching. Measure now to select the cushion pad.
Finishing
- Place the panels with wrong sides together and align all four corners. Using navy yarn and a yarn needle, whipstitch through the corresponding outer edges, keeping the seam close to the edge. Do not pull it tight enough to pucker the tiles.
- Sew three sides, insert the selected cushion pad, then sew the fourth side closed. Secure the yarn and weave in the end.
Helpful Tips
- Label small bobbins N, R, C and W to make the chart easier to follow.
- Mark off each completed diagonal, not each printed chart row. Diagonal 2 uses chart positions (1, 2) then (2, 1); diagonal 3 uses (3, 1), (2, 2) then (1, 3).
- Wash the removable cushion pad only as its manufacturer directs; follow the yarn label when cleaning the crocheted cover.
If youâd like to keep building your crochet skills, take a look at Christmas tapestry crochet patterns.
Nutcracker Christmas Stocking

This Nutcracker Christmas Stocking is a small-gift stocking with a red body, cream cuff and contrasting dark heel and toe. A flat nutcracker face decorates the leg, giving it a festive look without obstructing the opening.
The shaped heel gives the stocking a recognisable boot profile, while the face is made separately from the stocking itself. That distinction matters: the decoration stays on the front, leaving the inside available for treats and little presents.
This is an intermediate project for crocheters comfortable working both in rounds and in rows. A firm fabric helps the stocking hold its shape, and particular attention to the heel makes the transition from leg to foot easier to follow.
Nutcracker Christmas Stocking

Quick-reference card. Follow the complete written instructions below.
Materials
- Aran-weight acrylic or wool-blend yarn: Approximately 130 m red, 45 m dark charcoal, 35 m cream and 15 m pale beige, plus a small amount of gold for embroidery
- Crochet hook: 4 mm, or a size that gives a firm fabric at the stated gauge
- Other supplies: Stitch marker, tapestry needle and scissors
Size and Fit
One sample size. Target dimensions at the stated gauge: approximately 23 cm around the opening, 25 cm from cuff top to the base of the heel, and 15 cm from heel to toe. These are calculated targets, not measured results. The stocking has a flexible opening and is intended for small gifts.
Gauge
14 sc and 16 rounds or rows = 10 cm in firm single crochet. Check gauge before starting; a looser fabric may allow small contents to poke through.
Abbreviations
US crochet terms.
- ch = chain
- sc = single crochet
- sc2tog = single crochet two stitches together; one decrease
- sl st = slip stitch
- st(s) = stitch(es)
- RS = right side
Pattern
- Construction notes The cuff and appliqué pieces are worked in rows. The leg and foot are worked in continuous rounds; use a marker for the start of each round. Ch 1 at the start of a row does not count as a stitch. Leave sewing tails on the appliqué pieces.
- Cream cuff With cream, ch 33. Row 1: Sc in the second ch from the hook and in each remaining ch; 32 sc. Rows 2â4: Ch 1, turn, sc in each st; 32 sc. Fasten off, leaving a tail. Sew the short, four-row ends together to form a ring. The seam marks one side of the stocking. Leave the underside of the foundation chain accessible for the leg.
- Red leg Join red at the cuff seam. Working into the underside of the foundation chain, make 1 sc in each of the 32 chains. Mark the first sc as the start of round 1. Work 23 more rounds of sc in every st; 32 sc per round. There are 24 red leg rounds in total. The first 16 sts after the marker will form the heel; the other 16 sts will remain unworked while the heel is made. Fasten off red.
- Dark heel flap and turn Join charcoal in the first st after the leg-round marker. Working back and forth over only the first 16 sts, row 1 (RS): Sc in each of those 16 sts. Rows 2â8: Ch 1, turn, sc in all 16 sts. Row 9: Ch 1, turn, sc2tog, sc to the last 2 sts, sc2tog; 14 sts. Repeat row 9 three more times, turning at the start of each row; the stitch counts are 12, 10 and 8. Fasten off charcoal. The heel flap has 12 rows, with 8 live sts across its narrow end.
- Pick up for the foot With the RS facing, join red at the first of the 8 live heel sts. Foot round 1: Sc in each of the 8 live heel sts; pick up and sc in each of the 12 row ends along the first side of the heel; sc in each of the 16 held instep sts; pick up and sc in each of the 12 row ends along the other side of the heel. You have 48 sts: heel bottom 8, first side 12, instep 16, second side 12. Mark the start of the round and both edges of the 16-st instep.
- Gusset Work 8 decrease rounds in red. On each round, sc across the 8 heel-bottom sts and the first side until 2 side sts remain; sc2tog over those 2 sts. Sc across all 16 instep sts; sc2tog over the first 2 sts of the second side, then sc across its remaining sts. Move the instep-edge markers as needed. Each side loses 1 st per round, while the heel bottom and instep stay unchanged. After 8 decrease rounds, 32 sts remain: 8 heel-bottom, 4 on each side and 16 instep.
- Foot and dark toe Work 10 rounds of sc in red over all 32 sts. Change to charcoal. For the toe, divide the 32 sts into four consecutive groups of 8 and mark each group boundary. Toe round 1: In each group, sc to its last 2 sts, then sc2tog; 28 sts. Repeat this method for 5 more rounds, decreasing once at the end of each of the four groups on every round. The groups contain 7, 6, 5, 4, 3 and finally 2 sts after successive rounds; 8 sts remain after toe round 6. Fasten off with a long tail. Thread the tail through the front loops of the remaining 8 sts, draw closed and secure on the inside.
- Flat nutcracker face With pale beige, ch 11. Row 1: Sc in the second ch from the hook and across; 10 sc. Rows 2â7: Ch 1, turn, sc across; 10 sc. Fasten off, leaving a sewing tail.
- Flat hat and beard For the hat, use charcoal: ch 13, sc in the second ch from the hook and across for 12 sc; work 2 more rows of 12 sc. For the beard, use cream: ch 9, sc in the second ch from the hook and across for 8 sc; work 2 more rows of 8 sc. Fasten off each piece with a sewing tail. Embroider a short gold band across the hat before attaching it.
- Assemble the appliqué Lay the stocking flat with the 16-st instep centred on the front of the leg. Sew the face to the front of the red leg, well below the cuff. Sew the beard over the lower edge of the face, then sew the hat above the face with a slight overlap. Embroider two charcoal eyes, a small nose and a moustache on the visible face. Keep all stitches on the leg rather than sewing through both layers of the stocking.
- Reinforced hanging loop At the cuff seam, join cream through both seam edges and ch 20. Sl st back into the same seam to close the loop. Working around the loop, make 1 sc in each of its 20 chains, then sl st into the seam again. Fasten off with a long tail and sew the loop’s base through the cuff seam several times. Check that the loop does not close the stocking opening.
Finishing
- Weave in all ends securely on the inside. Take particular care at the heel pickups and toe closure.
- Ease the heel and toe into shape by hand. Do not press the raised facial embroidery flat.
Helpful Tips
- Pick up one stitch in each heel-flap row end. Placing an extra stitch in a corner will change the gusset count.
- Keep the nutcracker face below the cuff so the opening remains usable.
- For a sturdy stocking, use a firm single-crochet fabric and reinforce the hanging loop before filling it.
Nutcracker Drawstring Gift Bag

This nutcracker drawstring gift bag turns a small Christmas present into part of the decoration. Its upright navy shape provides a simple backdrop for the red-coated soldier, while the cord lets the recipient open the bag without disturbing the figure.
The flat base helps the bag stand when filled, and the straight sides provide room for the separate, flat nutcracker pieces. Keeping the soldier below the drawstring openings leaves the top free to gather, so the design is decorative without getting in the way of the closure.
It is a useful choice for a small gift you would rather present without disposable wrapping. After Christmas, the bag can be tucked away and used again.
Nutcracker Drawstring Gift Bag

Quick-reference card. Follow the complete written instructions below.
Materials
- DK cotton yarn: Approximately 50 g navy for the bag, plus small amounts of red, peach, black, white and yellow for the nutcracker and cord.
- Crochet hook: 4 mm, or a size that gives a firm fabric with no large gaps.
- Other supplies: Stitch marker, yarn needle, scissors and tape measure.
Size and Fit
One small-gift size. At the stated gauge, approximately 13 cm tall and 12 cm wide when laid flat, with a base around 8 cm across. The bag has 48 stitches around its sides; the appliqué fits on the front half.
Gauge
Aim for 20 sc and 22 rounds per 10 cm in firmly worked sc in the round. Gauge affects the finished size; check that the fabric is dense enough to hold a small gift.
Abbreviations
US crochet terms.
- ch = chain
- sc = single crochet
- sl st = slip stitch
- st = stitch
- rnd = round
- sp = space
- rep = repeat
Pattern
- Working notes Work the bag in joined rounds. At the end of each round, sl st to the first sc; ch 1 to begin the next round. Neither the joining sl st nor the starting ch 1 counts as a stitch. Keep the joins at the back. For each flat appliqué piece, ch 1 and turn after every row except the last; turning chains do not count as stitches.
- Base, rnd 1 With navy, make a magic ring, ch 1 and work 6 sc into the ring. Pull closed and join. (6 sc)
- Base, rnd 2 Work 2 sc in each st around. (12 sc)
- Base, rnd 3 Rep (sc in next st, 2 sc in next st) 6 times. (18 sc)
- Base, rnd 4 Rep (sc in next 2 sts, 2 sc in next st) 6 times. (24 sc)
- Base, rnd 5 Rep (sc in next 3 sts, 2 sc in next st) 6 times. (30 sc)
- Base, rnd 6 Rep (sc in next 4 sts, 2 sc in next st) 6 times. (36 sc)
- Base, rnd 7 Rep (sc in next 5 sts, 2 sc in next st) 6 times. (42 sc)
- Base, rnd 8 Rep (sc in next 6 sts, 2 sc in next st) 6 times. (48 sc)
- Straight sides, rnds 9â34 Sc in each st around for 26 rounds, joining each round as described above. Do not increase. (48 sc per round)
- Drawstring openings, rnd 35 Rep (sc in next 2 sts, ch 2, skip next 2 sts) 12 times. Join to the first sc. This makes 12 evenly spaced ch-2 openings.
- Top edge, rnds 36â37 Rnd 36: Rep (sc in next 2 sc, 2 sc in next ch-2 sp) 12 times; join. (48 sc) Rnd 37: Sc in each st around; join. (48 sc) Fasten off and weave in the ends.
- Red coat With red, ch 15. Row 1: Sc in the second ch from the hook and in each remaining ch. (14 sc) Rows 2â10: Ch 1, turn, sc in each st. (14 sc per row) Fasten off, leaving a sewing tail.
- Peach face Ch 9. Work 8 sc across row 1, then work 4 more rows of 8 sc. Fasten off, leaving a sewing tail. The face has 5 rows.
- Black hat Ch 13. Work 12 sc across row 1, then work 2 more rows of 12 sc. Fasten off, leaving a sewing tail. The hat has 3 rows.
- Black belt Ch 15. Work 14 sc across row 1, then work one more row of 14 sc. Fasten off, leaving a sewing tail.
- Red arms Make two. For each arm, ch 4 and work 3 sc across row 1. Work 7 more rows of 3 sc. Fasten off, leaving a sewing tail. Each arm has 8 rows.
- Black boots Make two. For each boot, ch 5 and work 4 sc across row 1. Work one more row of 4 sc. Fasten off, leaving a sewing tail.
- Crocheted drawstring With yellow, make a chain approximately 50 cm long when laid flat without stretching. Fasten off, leaving short tails for tying. Check its length against the bag before weaving it in: it should pass around the top edge and leave enough at both ends for a bow.
- Assemble the nutcracker Lay the bag flat with the joining line at the back. On the centre front, pin the coat over approximately bag rnds 13â22 and sew down its edges. Sew an arm alongside each upper side of the coat, with the arm tops level with the coat top. Sew the belt across the middle of the coat. Place the boots directly beneath the coat. Sew the face immediately above the coat and the hat immediately above the face, overlapping adjoining edges slightly so the pieces read as one figure. Keep the hat below rnd 35 and clear of every drawstring opening.
Finishing
- Using white yarn, embroider a short moustache across the lower face. Use black yarn for two small eyes and a short mouth; use yellow yarn for a hat band, a belt buckle and two coat buttons. Secure embroidery ends inside the bag.
- Weave the yellow chain through all 12 openings, bringing its ends out through two adjacent openings above the centre front. Tie the ends together to prevent them slipping back through, or leave enough length to tie a bow after filling the bag.
- Weave in any remaining ends. Place a small gift inside and pull the cord gently to close.
Helpful Tips
- Pin all the appliqué pieces in place before sewing. The hat must remain below the opening round, and no sewing should pass through an opening.
- If the bag sides flare, check that each straight-sided round still has 48 sc and that the joining sl st has not been worked as an extra stitch.
- For a sturdier closure, use the same DK cotton for the cord and avoid pulling a lightweight chain sharply against the openings.
Nutcracker Bottle Cover

Turn a plain bottle into a festive nutcracker with a red soldierâs coat, a cream face and a white beard. A separate, hat-shaped cuff gives the neck a distinctive silhouette while leaving the bottle opening clear.
This design suits a straight-sided bottle with a distinct shoulder. Rather than relying on a standard bottle size, the cover is fitted to the bottle you choose, so the result can sit neatly and still lift off. Checking the fit early makes it easier to adjust before adding the character details.
It is a cheerful Christmas table decoration and a handmade way to present a gifted bottle. The separate cuff and expressive face give it plenty of personality without making the bottle itself part of the crochet work.
Nutcracker Bottle Cover

Quick-reference card. Follow the complete written instructions below.
Materials
- DK cotton yarn: Red for the coat, cream for the face, white for the beard, black for the hat and features, and a small amount of gold for trim.
- Crochet hook: A size that gives a firm fabric with your yarn; 3.5 mm is a starting point.
- Notions: Stitch marker, yarn needle, scissors and tape measure.
- Bottle: A round, straight-sided bottle with a distinct shoulder and enough exposed neck for a short cuff. Remove the cap when fitting the cuff.
Size and Fit
Made to fit the chosen bottle. Measure the width of its flat bottom and mark where the straight body begins to slope into the shoulder. The base should sit nearly flush with the bottom; the sleeve should slide over the body without excessive stretch and finish just below the shoulder. The hat must slide past any neck ridges and sit below the bottle opening and threads.
Gauge
No fixed gauge: the bottle is the fit guide. Work firmly enough that the fabric holds its shape. Check the base and the first sidewall round against the bottle before continuing.
Abbreviations
US crochet terms.
- ch = chain
- sc = single crochet
- sl st = slip stitch
- BLO = back loop only
- sc2tog = single crochet two stitches together
- st(s) = stitch(es)
Pattern
- Working method Work joined rounds unless a row is specified. Join each round with a sl st to its first sc, then ch 1 to begin the next round. Joining sl sts and beginning chains do not count as stitches. Use a marker to identify the first sc; place joins at the back when dressing the bottle.
- Flat base With red, make a magic ring. Round 1: work 6 sc into the ring and join (6 sts). Round 2: work 2 sc in each st and join (12 sts). Round 3: repeat (sc in next st, 2 sc in next st) around and join (18 sts). For each further round, work one more plain sc before each increase: round 4 repeats (sc in next 2 sts, 2 sc in next st), round 5 uses 3 plain sc, and so on. Each round adds 6 sts. Stop when the flat circle is nearly the width of the bottleâs bottom, without extending beyond its edge. Let n be the number of base rounds; the last round has 6n sts.
- Start the sleeve Work 1 red sc BLO in each st around and join (6n sts). This turns the work upwards. Slip the base and this first sidewall round over the bottle to check the fit. It should slide onto the straight body without being forced. If it is too tight, undo the sidewall round, add another increase round to the base and try again. If it is loose, undo it and remove the last base round. Once the fit is right, keep the same stitch count throughout the sleeve.
- Red coat Work 1 red sc in each st around, joining each round, until the sleeve reaches roughly three-quarters of the distance from the bottle bottom to the start of its shoulder. Check the height with the cover on the bottle. On the last red sc, draw the cream yarn through for the final yarn-over, then join and continue in cream.
- Cream face Work 1 cream sc in each st around, joining each round, until the sleeve finishes just below the shoulder. Aim for at least 5 cream rounds so there is room for the features; on a shorter bottle, change from red to cream earlier. Fasten off. Do not carry the sleeve up the sloping shoulder or onto the neck.
- Separate beard With white, ch 9. Row 1: sc in the second ch from the hook and in each remaining ch; turn (8 sts). Rows 2â5: ch 1, sc in each st; turn (8 sts). Row 6: ch 1, sc2tog, sc in next 4 sts, sc2tog; turn (6 sts). Row 7: ch 1, sc2tog, sc in next 2 sts, sc2tog (4 sts). Fasten off, leaving a long tail for sewing.
- Hat-shaped neck cuff With the cap removed, make a loose black chain that fits around the neck below the opening. Choose a chain count m that is a multiple of 4. Join the chain into a ring without twisting it. Round 1: ch 1, sc in each chain and join (m sts). Check that the ring can pass over any neck ridges and sit below the threads; remake it if necessary. Rounds 2â3: ch 1, sc in each st and join (m sts). Round 4: change to gold and work 1 sc in each st; join (m sts). Round 5: change to black and repeat (sc in next 3 sts, 2 sc in next st) around; join (5m/4 sts). Fasten off. This final, slightly wider round is the lower brim. If five rounds would reach the opening on your bottle, omit round 3.
- Features and trim Lay the sleeve flat with its join at the back and mark the centre front. Sew the beardâs 8-stitch top edge across the lower part of the cream face, allowing its tapered end to overlap the coat. Embroider two small black eyes above it, a short black moustache either side of its top edge, and a small nose between the eyes and beard. Embroider a black belt around the red coat and a small gold square buckle at centre front. Keep yarn ends on the inside where possible.
- Dress the bottle Weave in the remaining ends. Slide the sleeve over the bottle. With the cap removed, slide the cuff down the neck with its wider black brim towards the shoulder; keep the top below the bottle opening and threads. Replace the cap if used.
Finishing
- Secure the beard and embroidered details without stitching through to the bottle.
- Check that both crochet pieces can be removed and that no yarn crosses the bottle opening.
- Hand wash the empty cover as appropriate for the yarn; dry it flat before putting it back on the bottle.
Helpful Tips
- Choose a bottle with a fairly straight body. A strongly tapered or square bottle needs a different fitting method.
- Fit matters more than a particular round count: check the sidewall early, before working the coat.
- If the cap cannot be removed, the hat ring must also fit over the cap while still sitting neatly on the neck; otherwise, use a different bottle.
Nutcracker Pennant Bunting

This nutcracker bunting brings a playful Christmas accent to a mantel or wall. The pointed pennants give each little soldier a bold silhouette, while the flat facial details keep the display lightweight and easy to hang.
The triangles narrow steadily from their wide top edges, making the shaping straightforward to follow. The faces, hats and beards are separate flat pieces, so you can arrange them on the pennants before sewing and give each nutcracker a similar expression.
A single crocheted header links the decorated pennants, with space between them so their points can hang freely. Keep the decoration below the top edge: that leaves a clear line for joining and helps the bunting lie neatly against the wall.
Nutcracker Pennant Bunting

Quick-reference card. Follow the complete written instructions below.
Materials
- DK cotton yarn: Allow approximately 30 g red, 10 g cream, 10 g navy and 5 g white, plus a small amount of black for facial details.
- Crochet hook: 4 mm, or a size that gives a firm fabric.
- Notions: Yarn needle, scissors and pins.
Size and Fit
Make three pennants. At the reference gauge, each triangle is approximately 20 cm wide across the top and 17.5 cm deep. The three-pennant display spans approximately 64 cm, including two 2 cm gaps but excluding the ties. The 25-chain ties add approximately 12 cm at each end. Dimensions are approximate; this decorative project does not require an exact fit.
Gauge
Reference gauge: approximately 20 sc and 12 rows per 10 cm in plain sc. Exact gauge is not essential, but keep the fabric firm enough to support the sewn-on pieces.
Abbreviations
US crochet terms.
- ch = chain
- sc = single crochet
- sc2tog = single crochet two stitches together; decreases one stitch
- st(s) = stitch(es)
- RS = right side
Pattern
- Before you begin The turning ch does not count as a stitch. Work all appliqués as flat pieces. Make and decorate all three pennants before joining them.
- Pennant: make three With red, ch 41. Row 1 (RS): Sc in the second ch from hook and in each remaining ch; 40 sc. Row 2: Ch 1, turn, sc2tog, sc in each st until two sts remain, sc2tog; 38 sc. Rows 3â20: Repeat Row 2. Each row loses two sts; Row 20 ends with 2 sc. Row 21: Ch 1, turn, sc2tog; 1 sc. Fasten off. The foundation-chain edge is the wide top edge.
- Face: make three With cream, ch 7. Row 1: Sc in the second ch from hook and in each remaining ch; 6 sc. Rows 2â5: Ch 1, turn, sc in each st; 6 sc. Fasten off, leaving a tail for sewing.
- Hat: make three With navy, ch 9. Row 1: Sc in the second ch from hook and in each remaining ch; 8 sc. Rows 2â3: Ch 1, turn, sc in each st; 8 sc. Fasten off, leaving a tail for sewing.
- Beard: make three With white, ch 7. Row 1: Sc in the second ch from hook and in each remaining ch; 6 sc. Row 2: Ch 1, turn, sc in each st; 6 sc. Fasten off, leaving a tail for sewing.
- Decorate the pennants Lay each red triangle RS up with its wide edge at the top. Centre a cream face below the top edge, roughly opposite pennant Rows 6â10, and sew around its edges. Centre a navy hat above it, roughly opposite Rows 3â5, allowing the hat to overlap the face slightly; sew in place. Sew a white beard over the lower edge of the face, roughly opposite Rows 11â12. Embroider two small black eyes on the exposed cream area. Keep all sewing stitches clear of the pennantâs top foundation edge.
- Crocheted header and ties Arrange the pennants RS up, points downward, in the order you want them to hang. With red, ch 25 for the first tie. Working from left to right across the first pennantâs top edge, sc once through each of its 40 foundation chains; 40 joining sc. Ch 4 for a gap. Sc through each of the second pennantâs 40 foundation chains, ch 4, then sc through each of the third pennantâs 40 foundation chains. Ch 25 for the second tie and fasten off. Keep the top edges flat rather than gathering them.
Finishing
- Weave in ends on the backs of the pennants and header without pulling the triangles out of shape.
- Gently flatten the bunting if needed, following the yarn care instructions.
- Knot the end of each chain tie if desired, then use the ties to secure the bunting. Hang it out of reach of small children.
Helpful Tips
- Pin each set of facial pieces in place before sewing so the three nutcrackers sit at similar heights.
- If a foundation chain is hard to identify, count its 40 positions before beginning the header and mark the first and last.
Nutcracker Bookmark

This little nutcracker brings a festive touch to a book without the bulk of a stuffed ornament. Its long, flat shape works as a page marker, while the contrasting colour blocks give the impression of boots, a bright uniform and a face.
The design is a good choice for a confident beginner who wants to practise neat colour changes and simple shaping. Embroidered facial features and buttons add character without raised decorations that might press into the pages.
It would make a thoughtful addition to a Christmas book gift, especially for someone who prefers a useful decoration they can enjoy beyond the holiday season.
Nutcracker Bookmark

Quick-reference card. Follow the complete written instructions below.
Materials
- Fine cotton yarn: Small amounts of navy, red and cream; choose a smooth fingering-weight cotton.
- Embroidery thread: White for the beard and black for the eyes and coat buttons.
- Crochet hook: 1.75 mm, or a size that makes a firm, flexible fabric.
- Other tools: Yarn needle, embroidery needle, scissors and rustproof pins for blocking.
Size and Fit
One size. Approximately 2.7 cm wide and 12.2 cm long at the stated gauge. It lies flat between book pages; no attached pieces are needed.
Gauge
Approximately 30 sc and 32 rows to 10 cm in flat sc. Gauge is a guide to the finished dimensions, not a requirement for fit.
Abbreviations
US crochet terms.
- ch = chain
- sc = single crochet
- sc2tog = single crochet two stitches together
- st(s) = stitch(es)
Pattern
- Before you begin Work in rows, turning after every row. A turning ch 1 does not count as a stitch. Change colour on the final yarn-over of the last sc in the preceding row, so the next row begins in the new colour. Keep unused yarn off the back rather than carrying it along the strip.
- Boots: rows 1â10 With navy, ch 9. Row 1: sc in the second ch from the hook and in each remaining ch; 8 sc. Rows 2â10: ch 1, turn, sc in each st; 8 sc per row.
- Coat: rows 11â28 Change to red. Rows 11â28: ch 1, turn, sc in each st; 8 sc per row.
- Face: rows 29â35 Change to cream. Rows 29â35: ch 1, turn, sc in each st; 8 sc per row.
- Hat: rows 36â39 Change to navy. Row 36: ch 1, turn, sc in each st; 8 sc. Row 37: ch 1, turn, sc2tog, sc in the next 4 sts, sc2tog; 6 sc. Rows 38â39: ch 1, turn, sc in each st; 6 sc per row. Fasten off.
- Flat embroidered details Weave in yarn ends. With single strands of embroidery thread, make small black straight-stitch eyes on face row 34, spaced apart. Embroider a white moustache across face row 32 and a few short downward white straight stitches over rows 29â31 for the beard. Add three small black straight-stitch buttons down the centre of the red coat, near rows 17, 21 and 25. Secure thread ends without knots or thick layers on the back.
Finishing
- Gently dampen the bookmark, pin it flat with straight edges and let it dry completely.
- Check that all thread ends are secure and no loops or knots protrude before placing it in a book.
Helpful Tips
- Use a single strand for embroidery and avoid raised knots; the bookmark should remain thin enough to sit between pages.
- If your stitches are too loose to hold a crisp edge, try a smaller hook rather than adding a bulky backing.
Mini Nutcracker Keyring

This Mini Nutcracker Keyring turns a familiar Christmas character into a charm made to hang from your keys, bag or festive gift wrapping. Its round face, short red coat and shallow hat give it a recognisable silhouette without asking it to stand on its own.
The small scale makes the embroidered expression especially important: a few carefully placed details give the nutcracker its character while keeping the surface smooth enough for everyday handling. Firm crochet fabric helps the stuffed pieces hold their shape.
This is an intermediate project because the pieces are small and the hanging point needs careful attention. The crochet tab is stitched through the hat into the head, rather than relying on the hat alone, so the finished charm is designed to hang securely from its ring.
Mini Nutcracker Keyring

Quick-reference card. Follow the complete written instructions below.
Materials
- Cotton yarn: Small amounts of DK cotton in skin tone, red and black; scraps of white and gold or yellow for embroidery.
- Crochet hook: A size that produces firm fabric with no visible stuffing, such as 2.5 mm with DK cotton.
- Stuffing: A small amount of toy stuffing.
- Split ring: One metal keyring split ring, approximately 20 mm across.
- Other tools: Stitch marker, yarn needle and scissors.
Size and Fit
One sample size. The head is 24 stitches around, the coat is 18 stitches around, and the tab is 4 stitches wide. Finished height depends on yarn and tension; allow roughly 7â9 cm from the top of the hat to the bottom of the coat, excluding the tab and split ring.
Gauge
No fixed gauge is required. Use a smaller hook if gaps appear when the pieces are lightly stuffed. Keep the same yarn and hook for the head, coat, hat and tab.
Abbreviations
US crochet terms.
- ch = chain
- sc = single crochet
- inc = work 2 sc in the next stitch
- dec = single crochet 2 stitches together
- MR = magic ring
- st(s) = stitch(es)
Pattern
- Before you begin Work the head, coat and hat in continuous rounds, moving a marker to the first stitch of each round. Numbers in brackets are stitch counts. Do not join rounds or count the marker as a stitch. Make the tab in turned rows; turning chains do not count as stitches.
- Head, skin tone â rounds 1â4 Round 1: 6 sc in an MR (6). Round 2: inc in each st (12). Round 3: (sc, inc) 6 times (18). Round 4: (2 sc, inc) 6 times (24).
- Head â rounds 5â11 Rounds 5â8: sc in each st (24). Round 9: (2 sc, dec) 6 times (18). Round 10: (sc, dec) 6 times (12). Stuff firmly without stretching the stitches. Round 11: dec 6 times (6). Fasten off with a long tail; thread it through the front loops of the final 6 sts, pull closed and secure.
- Coat, red â rounds 1â3 Round 1: 6 sc in an MR (6). Round 2: inc in each st (12). Round 3: (sc, inc) 6 times (18). The starting circle is the bottom of the coat.
- Coat â rounds 4â11 Rounds 4â9: sc in each st (18). Round 10: (sc, dec) 6 times (12). Add a little stuffing, leaving the top soft enough to sew. Round 11: dec 6 times (6). Fasten off with a long tail; thread it through the front loops of the final 6 sts and pull closed. Keep the tail for assembly.
- Hat, black â rounds 1â6 Round 1: 6 sc in an MR (6). Round 2: inc in each st (12). Round 3: (sc, inc) 6 times (18). Round 4: (2 sc, inc) 6 times (24). Rounds 5â6: sc in each st (24). Fasten off, leaving a long tail for sewing. Leave the bottom of the hat open and unstuffed.
- Tab, black â rows 1â12 Ch 5. Row 1: sc in the second ch from the hook and in each remaining ch (4); ch 1, turn. Rows 2â11: sc in each st (4); ch 1, turn. Row 12: sc in each st (4). Fasten off with a long tail. The strip must pass through the split ring and fold in half with both ends reaching the hat crown. If your row height makes that impossible, add pairs of 4-sc rows before fastening off.
- Embroider the face and coat With the hat opening temporarily placed over the top of the head, mark the visible front. Remove the hat. Use black yarn to embroider two small eyes on head round 6, a short moustache below them and eyebrows above them. Add a small white straight stitch beneath the moustache for teeth. Keep knots and yarn ends secure inside the head where possible. On the coat, embroider a vertical gold or yellow line down the front and two short horizontal lines for jacket trim.
- Assemble and attach the ring Sew the coatâs closed top to the headâs closed bottom, taking small stitches around the join through both pieces. Centre the unstuffed hat on the head and sew its open edge to the head all the way around. Pass the tab through the split ring and fold it in half. Lay both tab ends flat against the centre of the hat crown. Using the tab tail and a yarn needle, stitch through both tab ends, the hat crown and firmly into the stuffed head several times; stitch across the full width of the tab and secure the yarn inside the work. Give the ring a gentle pull to check the attachment.
Finishing
- Weave in and secure all remaining yarn ends; trim them close without cutting the attachment stitches.
- Check that the face remains visible below the hat and that the coat hangs directly beneath the head.
- Reinforce any join that shifts when the split ring is gently pulled. Do not substitute glue for stitching.
Helpful Tips
- Embroider facial details before sewing on the hat so its lower edge does not crowd the eyebrows.
- Stuff the coat lightly; too much stuffing can round out its short, narrow shape.
- This small charm is not suitable for children under three because the split ring and small parts may pose a hazard.
Nutcracker Tree Topper

This nutcracker is designed to sit over the tip of a small tabletop Christmas tree. Its hollow shell gives the soldier a clear shape without stuffing, while the flat arms and pointed beard add character without making it bulky.
For a removable fit, measure around the tree where the bottom of the topper will rest, then choose a pattern opening that gives the branches a little clearance. Check the tree nearer its tip, too: that part must fit inside the narrower face section. Your own crochet tension affects the finished opening, so compare your work with the tree before securing the lower edge.
The dark hat, cream face and red coat make the nutcracker easy to recognise among Christmas decorations. A firm fabric will help it hold its shape; on a flexible tree tip, let a sturdy upper branch support the topper rather than pushing it firmly onto the crown.
Nutcracker Tree Topper

Quick-reference card. Follow the complete written instructions below.
Materials
- Aran-weight cotton yarn: Approximately 30 g red, 20 g cream and 15 g charcoal; small amounts of black and gold for embroidery.
- Crochet hook: 3.5 mm, or a size that produces a firm fabric with no large gaps.
- Notions: Stitch marker, yarn needle, scissors and a flexible tape measure.
Size and Fit
The sample has a 32-stitch lower opening, approximately 20 cm in circumference at the stated gauge. Its side wall is approximately 10â11 cm tall; the shaped crown adds a little height. Before starting, measure around the tree tip about 10â11 cm below its highest point. Choose a lower opening 0.5â3 cm larger than that measurement. The instructions offer 28-stitch (approximately 17.5 cm), 32-stitch (approximately 20 cm) and 36-stitch (approximately 22.5 cm) openings. Also check the tree about 5 cm below its tip: it should measure less than 14 cm around so it fits within the narrower face section. Check the shell on the tree before reinforcing the hem.
Gauge
16 sc and 25 rounds = 10 cm in firm sc worked in the round. Gauge determines the opening circumference, so measure your own work before selecting a hem option.
Abbreviations
US crochet terms.
- BLO = back loop only
- ch = chain
- inc = work 2 sc in the next stitch
- rnd = round
- sc = single crochet
- sc2tog = single crochet 2 stitches together
- sl st = slip stitch
- st = stitch
Pattern
- Before you begin Work the shell in continuous rounds, moving a marker at the start of each rnd. Make colour changes in the final yarn-over of the last sc of the preceding rnd. Do not stuff the shell.
- Hat crown, charcoal Rnd 1: Work 6 sc in a magic ring; pull the ring closed. Rnd 2: Inc in each st (12). Rnd 3: (Sc in next st, inc) 6 times (18). Rnd 4: (Sc in next 2 sts, inc) 6 times (24).
- Hat sides, charcoal Rnd 5: Working BLO, sc in each st (24). Rnds 6â9: Sc in each st (24). Change to cream at the end of rnd 9.
- Face, cream Rnds 10â17: Sc in each st (24). Change to red at the end of rnd 17.
- Coat, red Rnds 18â19: Sc in each st (24). Rnd 20: (Sc in next 5 sts, inc) 4 times (28). Rnds 21â24: Sc in each st (28).
- Select the lower opening For the 32-stitch sample, rnd 25 is (sc in next 6 sts, inc) 4 times (32). For a smaller opening, sc in each st on rnd 25 (28). For a larger opening, work (inc, sc in next 2 sts, inc, sc in next 3 sts) 4 times on rnd 25 (36). Choose using your measured gauge and tree-tip circumference.
- Hem Rnds 26â30: Sc in each st, maintaining your chosen count of 28, 32 or 36. Slip the shell over the tree tip now to check that it fits without forcing the branches. Rnd 31: Work 1 loose sl st in each st around, maintaining the same count. Fasten off. The slip stitches reinforce the removable lower edge; do not pull them tight enough to narrow the opening.
- Flat arms, make two With red, ch 5. Row 1: Sc in the second ch from the hook and in each remaining ch (4). Rows 2â7: Ch 1, turn, sc in each st (4). Change to cream. Row 8: Ch 1, turn, sc in each st (4). Fasten off, leaving a red tail at the shoulder end for sewing. The cream row forms a narrow cuff.
- Pointed beard With cream, ch 7. Row 1: Sc in the second ch from the hook and across (6). Row 2: Ch 1, turn, sc across (6). Row 3: Ch 1, turn, sc2tog, sc in next 2 sts, sc2tog (4). Row 4: Ch 1, turn, sc2tog twice (2). Row 5: Ch 1, turn, sc2tog (1). Fasten off, leaving a long tail at the wide edge for sewing.
- Features and assembly Choose a front, keeping the beginning-of-round line at the back. Embroider two small black eyes across rnd 12 and a short black moustache across rnd 14. Sew the beard’s wide edge centrally just below the moustache, leaving its point free over the top of the coat. Sew each arm at its red shoulder end to a side of the coat across rnds 18â20, with the cream cuffs pointing down; leave the rest of each arm flat against the shell. Embroider a narrow gold line at the lower edge of the hat and, if desired, a short black belt line on the front of rnd 24. Keep embroidery ends secured inside without drawing the shell inward.
Finishing
- Weave in ends without joining opposite sides of the hollow shell.
- Check the hem circumference after reinforcing it. Ease the unstuffed topper over the tree tip and lift it off again to confirm it remains removable.
- If the tree tip is flexible, rest the topper on a sturdy upper branch rather than pushing it down onto the crown.
Helpful Tips
- A firm cotton fabric helps the hat and coat hold their shape; avoid a loose gauge that shows gaps.
- Measure the tree where the lower hem will sit, not only at the narrowest point of the tip.
- If your gauge differs, calculate each opening circumference as stitch count divided by your stitches per centimetre before choosing 28, 32 or 36 stitches.
Nutcracker Face Wreath

This nutcracker wreath combines the familiar shape of a Christmas decoration with a characterful face. Its lightly stuffed ring gives the piece a soft, rounded outline, while the centre stays visibly open rather than becoming a solid portrait.
The cream face follows the upper curve of the wreath, with a flat navy hat above it and a white moustache and pointed beard below. The beard hangs a little way into the opening, adding expression without hiding the ring shape.
This is an intermediate project for crocheters who enjoy making small pieces and arranging them into a finished decoration. It would look cheerful on a tree or among a collection of handmade Christmas ornaments.
Nutcracker Face Wreath

Quick-reference card. Follow the complete written instructions below.
Materials
- Aran-weight yarn: Approximately 45 m navy, 15 m cream and 10 m white; small lengths of black and pink for facial features. Acrylic or cotton will work.
- Crochet hook: 4 mm, or a size that makes a firm fabric.
- Other: Small amount of toy stuffing, stitch marker, yarn needle and scissors.
Size and Fit
One decorative size. At the suggested gauge, the ring is approximately 15 cm across with an opening approximately 9 cm across; the hat brings the overall height to approximately 20 cm. These are gauge-based estimates, not measured results.
Gauge
Aim for approximately 14 sc and 16 rows or rounds per 10 cm. Exact gauge is not essential, but use a firm fabric that contains the stuffing.
Abbreviations
US crochet terms.
- ch = chain
- sc = single crochet
- sl st = slip stitch
- sc2tog = single crochet two stitches together
- sc3tog = single crochet three stitches together
- st(s) = stitch(es)
Pattern
- Wreath tube With navy, ch 12 and sl st into the first ch to form a ring, taking care not to twist it. Round 1: Sc in each ch around (12 sc). Place a marker in the first sc. Work continuously, moving the marker at the start of each round. Rounds 2â60: Sc in each st around (12 sc per round). Stuff lightly as the tube grows, leaving both ends accessible. Fasten off with a long sewing tail.
- Join the wreath Bring the tube ends together without twisting the tube. Add stuffing at the join if needed, then use the navy tail to whipstitch the 12 stitches of the final round to the 12 foundation-chain stitches, matching them one for one. Secure the seam at the bottom of the wreath. Opposite this seam, mark an upper arc approximately 20 rounds long, centred around Round 30; this is where the face will sit.
- Cream face panel With cream, ch 19. Row 1: Sc in the second ch from the hook and in each ch across (18 sc). Ch 1, turn. Rows 2â5: Sc in each st across (18 sc); ch 1 and turn after Rows 2â4 only. Fasten off, leaving a sewing tail. Curve the panel along the marked upper arc on the front of the tube, with its 18-stitch edges following the arc. Sew around its edges without stitching across the wreath opening.
- Hat crown With navy, ch 15. Row 1: Sc in the second ch from the hook and in each ch across (14 sc). Ch 1, turn. Rows 2â8: Sc in each st across (14 sc); ch 1 and turn after Rows 2â7 only. Fasten off, leaving a sewing tail.
- Hat brim With navy, ch 21. Row 1: Sc in the second ch from the hook and in each ch across (20 sc). Ch 1, turn. Row 2: Sc in each st across (20 sc). Fasten off, leaving a sewing tail. Centre the crownâs 14-stitch lower edge behind one long edge of the brim, leaving three brim stitches projecting on each side, and sew the pieces together. Sew the brimâs other long edge to the outer, upper edge of the cream face panel and adjacent navy ring. Let the crown stand above the ring.
- Moustache, make two With white, ch 6. Row 1: Sc in the second ch from the hook and in each ch across (5 sc). Ch 1, turn. Row 2: Sc2tog, sc 1, sc2tog (3 sc). Ch 1, turn. Row 3: Sc3tog (1 sc). Fasten off with a sewing tail. Sew the two 5-stitch edges side by side across the lower half of the face, with their pointed ends directed slightly outwards and down.
- Beard With white, ch 9. Row 1: Sc in the second ch from the hook and in each ch across (8 sc). Ch 1, turn. Row 2: Sc2tog, sc 4, sc2tog (6 sc). Ch 1, turn. Row 3: Sc2tog, sc 2, sc2tog (4 sc). Ch 1, turn. Row 4: Sc2tog twice (2 sc). Fasten off with a sewing tail. Sew the 8-stitch top edge just below the moustache at the inner edge of the face panel. Allow the point to hang a short way into the opening; do not sew it across the opening.
- Face and hanging loop Embroider two small black eyes above the moustache and a short pink stitch between them for the nose. For the hanging loop, ch 24 with navy and fasten off, leaving tails at both ends. Sew the ends approximately 2 cm apart to the back of the ring at its top, behind the hat. Secure each end through several stitches of the tube.
Finishing
- Weave in and secure all loose ends.
- Smooth the stuffing around the ring so the tube is even, and straighten the hat and beard.
- Check that the centre remains visibly open and that the hanging loop is firmly attached before displaying the wreath.
Helpful Tips
- Keep the tube stuffing light enough that it bends readily into a ring; overstuffing makes the join bulky.
- If the face panel seems slightly wider than the marked arc, ease it into place with small, evenly spaced sewing stitches rather than gathering one end.
- For a neat face, embroider the features before attaching the moustache if access is easier.
For another related project collection, browse crochet Christmas ornament patterns.
Round Nutcracker Coaster

This nutcracker coaster turns a simple circle into a festive face. A flat navy hat extends from one edge, giving the character a recognisable silhouette without taking up the space where a cup sits.
The design suits a confident beginner who is comfortable working in rounds and making a small shaped extension. Short, flat facial details add expression without the wobble that raised buttons or stuffing could cause.
It makes a cheerful addition to a Christmas table or a small handmade gift. Use it as a drinks coaster rather than a heat-protective trivet.
Round Nutcracker Coaster

Quick-reference card. Follow the complete written instructions below.
Materials
- DK cotton yarn: Approximately 20 g cream and 5 g navy, plus a short length of charcoal for the face.
- Crochet hook: 3.5 mm, or a size that produces a firm, flat fabric.
- Other tools: Stitch marker, tapestry needle, scissors and blocking pins.
Size and Fit
One size. The cream circle is approximately 8.5â9 cm across; the hat extends approximately 2.5 cm beyond its edge. Size will vary with yarn and tension.
Gauge
Approximately 20 sc and 21 rows per 10 cm in firm sc fabric. Gauge is a guide; prioritise a flat circle and a firm surface for a cup.
Abbreviations
US crochet terms.
- ch = chain
- sc = single crochet
- inc = work 2 sc in the same stitch
- sc2tog = single crochet 2 stitches together
- st(s) = stitch(es)
- rnd = round
Pattern
- Cream circle: set-up With cream, make a magic ring. Rnd 1: Work 6 sc into the ring. Pull the ring closed. Work in continuous rounds, marking the first stitch of each round.
- Rnd 2 Inc in each st around. (12 sts)
- Rnd 3 (Sc in next st, inc in next st) 6 times. (18 sts)
- Rnd 4 (Sc in next 2 sts, inc in next st) 6 times. (24 sts)
- Rnd 5 (Sc in next 3 sts, inc in next st) 6 times. (30 sts)
- Rnd 6 (Sc in next 4 sts, inc in next st) 6 times. (36 sts)
- Rnd 7 (Sc in next 5 sts, inc in next st) 6 times. (42 sts)
- Rnd 8 (Sc in next 6 sts, inc in next st) 6 times. (48 sts)
- Rnd 9 (Sc in next 7 sts, inc in next st) 6 times. (54 sts) Fasten off and weave in the end. Lay the circle flat and choose any 13 consecutive edge stitches for the top of the face; mark the first and last.
- Hat row 1 With the right side facing, join navy in the first marked edge stitch. Ch 1 (does not count as a stitch). Sc in that stitch and in each of the next 12 edge stitches. (13 sts)
- Hat row 2 Ch 1, turn. Sc in each st across. (13 sts)
- Hat row 3 Ch 1, turn. Sc2tog, sc in next 9 sts, sc2tog. (11 sts)
- Hat rows 4â5 Ch 1, turn. Sc in each of the 11 sts across. Repeat once more, then fasten off. (11 sts in each row)
- Face Thread the tapestry needle with charcoal yarn. Just below the hat, make two short, flat stitches for eyes, spaced evenly either side of the centre. Add a tiny straight stitch for the nose and two or three short stitches for a mouth below it. Keep the features small and close to the hat, rather than adding bulky details to the middle of the drinking surface. Secure the yarn on the back without knots.
Finishing
- Weave in all ends so they lie flat on the back.
- Lightly dampen and pin the circle flat, straightening the hatâs sides and top. Leave to dry completely before use.
Helpful Tips
- If the circle cups, relax your tension slightly; if it ripples, try a firmer tension or a smaller hook.
- Use only short, snug embroidery stitches. Avoid buttons, stuffing and bulky knots that could make a cup wobble.
- Cotton is absorbent, but this coaster is not a heat-protective trivet.
Nutcracker Mug Cosy

A nutcracker mug cosy brings a little Christmas character to an everyday cup without hiding its handle. The flat wrap keeps the decoration on the front, while the fastening sits beside the handle, so the face remains visible when the mug is in use.
Because mug shapes and handles vary, this is a project to fit to the mug you have rather than make to a fixed length. Look for a clear path around the cup between the handle attachments; the pattern card explains how to measure that path and check the fastening. The small, flat nutcracker motif adds detail without making the front bulky.
Nutcracker Mug Cosy

Quick-reference card. Follow the complete written instructions below.
Materials
- DK cotton yarn: Red for the band, cream for the face, dark blue for the hat, white for the beard, and small amounts of black for embroidered features.
- Crochet hook: 4 mm, or a size that makes a firm fabric.
- Button: One button approximately 15â20 mm across.
- Other tools: Tapestry needle, scissors, measuring tape and stitch markers.
Size and Fit
The band is 10 sc tall, approximately 5 cm if your stitch width is near 5 mm. Choose a mug with a clear section between the handle attachments tall enough for the band and room to pass a loop through the handle opening. At that height, use a tape to measure the route around the mug from one side of the handle clearance, across the front, to the other side. Make the band that length; its ends should sit beside the handle, not over its attachments. Adjust the number of band rows to your measurement.
Gauge
Gauge is not critical because the band is fitted by measurement. Check the height after the first few rows: if 10 sc is too tall for the clear section of your mug, restart with fewer foundation chains and work one fewer sc for each chain removed. Keep that stitch count throughout the band.
Abbreviations
US crochet terms.
- ch = chain
- sc = single crochet
- sl st = slip stitch
- st = stitch
Pattern
- Measure the mug Check that the planned band height fits between the handle attachments. Measure the bandâs route around the mug as described in Size and Fit. Mark the midpoint of that route on your tape; it will help you position the face opposite the fastening.
- Band, row 1 With red, ch 11. Sc in the second ch from the hook and in each remaining ch. You have 10 sc. The stitches across this row form the height of the band; additional rows build its length.
- Band, row 2 onwards Ch 1, turn, sc in each of the 10 sts. Repeat this row until the band reaches your measured route length. Check it on the mug as you work: both short ends should stop beside the handle, with the front comfortably covered. Fasten off.
- Face With cream, ch 7. Row 1: sc in the second ch from the hook and in each remaining ch (6 sc). Rows 2â5: ch 1, turn, sc in each st (6 sc). Fasten off, leaving a sewing tail.
- Hat With dark blue, ch 9. Row 1: sc in the second ch from the hook and in each remaining ch (8 sc). Rows 2â3: ch 1, turn, sc in each st (8 sc). Fasten off, leaving a sewing tail.
- Beard With white, ch 7. Row 1: sc in the second ch from the hook and in each remaining ch (6 sc). Row 2: ch 1, turn, sc in each st (6 sc). Fasten off, leaving a sewing tail.
- Make the nutcracker Lay the band flat with its long edges at the top and bottom. Centre the cream face between the short ends, away from the fastening position, and sew it down. Centre the hat above it, overlapping the top of the face slightly; sew it down. Overlap the beard slightly across the bottom of the face and sew it down. Keep the complete motif within the bandâs long edges. Embroider two small eyes and a short mouth on the visible cream area with black yarn.
- Button and loop Sew the button securely near the upper corner of the bandâs starting short end, keeping it clear of the mug rim. Join red yarn at the corresponding upper corner of the final short end. Ch a trial length and, without fastening off, hold the band on the mug. Fold the chain back towards its starting corner to form a loop: the folded loop must pass through the handle opening, reach the button and slip over it with slight tension. Add or remove chains as needed. Sl st into the corner where the chain began to close the loop, then fasten off. Check the fastening on the mug before weaving in the loop end.
Finishing
- Weave in all ends and check that the face lies flat when the band is fastened.
- Remove the cosy before washing the mug. Do not put a mug wearing the cosy in a microwave.
- Check the button regularly; a buttoned cosy is not suitable for unsupervised young children.
Helpful Tips
- If the band is between two possible row lengths, try both against the mug before fastening off; cotton has limited stretch.
- Position the face while the band is wrapped around the mug so it faces forwards rather than towards the handle.
- For a different mug, remeasure the route around its handle clearance rather than relying on the row count from a previous cosy.
Nutcracker Napkin Ring

This little nutcracker brings a festive character to a Christmas place setting without taking up space on the table. His flat face and stepped hat give him a recognisable soldier silhouette, while the beard adds a soft contrast.
The decoration sits on the outside of the ring, with the head rising above the napkin rather than crowding the opening. It is a practical choice for a table decoration that still needs to hold a folded cloth napkin comfortably.
Napkin folds and fabric thickness can change how a ring fits, so choose the napkin you plan to use before making yours. A crisp fold makes a neat backdrop for the nutcracker; a softer fold gives the setting a more relaxed look.
Nutcracker Napkin Ring

Quick-reference card. Follow the complete written instructions below.
Materials
- DK cotton yarn: Small amounts of dark charcoal for the ring, cream for the face, red for the hat, white for the beard and black for the eyes
- 3.5 mm crochet hook: Or a hook that gives a firm fabric
- Yarn needle and scissors: For seaming, embroidery and weaving in ends
Size and Fit
The sample ring has approximately 17 cm of inside circumference and is about 2.3 cm tall at the suggested gauge. Before seaming, wrap the band loosely around the folded napkin you intend to use. For a different fit, add or remove stitches from the starting chain; keep 5 rows for the band and leave its short ends unoverlapped when seaming.
Gauge
Aim for approximately 20 sc and 22 rows per 10 cm in firm, flat fabric. Exact gauge is less important than checking the band against your folded napkin before joining it.
Abbreviations
US crochet terms.
- ch = chain
- sc = single crochet
- st = stitch
- inc = work 2 sc in one st
Pattern
- Ring band, Row 1 With dark yarn, ch 35. Sc in the second ch from the hook and in each remaining ch. You have 34 sc.
- Ring band, Rows 2â5 Ch 1, turn; sc in each st across. Make 5 rows in total, each with 34 sc. The turning ch does not count as a st. Fasten off, leaving a tail for seaming.
- Check and join the ring Wrap the band around the folded napkin to check the fit. If needed, remake it with a longer or shorter starting chain, working one sc fewer than the number of chains. Butt the two short ends together and sew them edge to edge with the yarn needle. Do not overlap them.
- Face, Row 1 With cream yarn, ch 9. Sc in the second ch from the hook and in each remaining ch. You have 8 sc.
- Face, Rows 2â7 Ch 1, turn; sc in each st across. Make 7 rows in total, each with 8 sc. Fasten off, leaving a tail to attach the face.
- Hat, Rows 1â3 With red yarn, ch 7. For Row 1, sc in the second ch from the hook and in each remaining ch (6 sc). For Rows 2 and 3, ch 1, turn and sc in each st across (6 sc each row). Row 1 will be the narrow top of the hat.
- Hat, Row 4 Ch 1, turn. Inc in the first st, sc in each of the next 4 sts, then inc in the last st. You have 8 sc.
- Hat, Row 5 Ch 1, turn; sc in each st across. You have 8 sc.
- Hat, Row 6 Ch 1, turn. Inc in the first st, sc in each of the next 6 sts, then inc in the last st. You have 10 sc.
- Hat, Row 7 Ch 1, turn; sc in each st across. You have 10 sc. Fasten off, leaving a tail for sewing. This wider edge is the bottom of the hat.
- Embroider the face Hold the face with Row 7 at the top. With black yarn, make two small eyes across Row 5. Add a small nose with red yarn on Row 4. With white yarn, make several short straight stitches across Rows 1â3 for a beard. Secure the embroidery ends on the back.
- Assemble Centre the 10-st bottom edge of the hat over the 8-st top edge of the face, leaving one hat stitch projecting at each side, and sew the edges together. Position the head on the outside of the ring, centred over the band seam if you wish. Sew only the lower three rows of the face to the outside of the band; let the rest of the face and hat stand above its top edge. Keep all sewing on the outer layer so the napkin opening stays clear.
Finishing
- Weave in all ends without pulling the ring out of shape.
- Slip a folded cloth napkin through the ring and straighten the head and hat.
Helpful Tips
- A firm cotton fabric helps the flat head hold its shape without stuffing.
- Check the band around an actual folded napkin before sewing its ends; folds and fabric thickness vary.
- If you adjust the band length, the face and hat stitch counts can stay the same.
Nutcracker Table Runner

Give a festive table a focal point with a nutcracker at each end of this rectangular runner. The soldiersâ heads sit nearest the plain centre, so each figure appears upright when viewed from its end of the table. The open space between them leaves room for a centrepiece without making the design feel crowded.
The colourwork is the main challenge. Its small, symmetrical motifs are easier to follow than a picture that changes across the full width, while the plain centre offers a welcome break between panels. Keep colour changes tidy and avoid pulling carried yarn too tight, as that can distort the soldiers and narrow the fabric.
The simple edging gives the runner a clean outline suited to a dining table, sideboard or festive display. For everyday use, choose a washable yarn and follow its care label so the finished piece can be refreshed after the celebrations.
Nutcracker Table Runner

Quick-reference card. Follow the complete written instructions below.
Materials
- Washable DK cotton: Approximately 600 m cream (C), 120 m red (R), 120 m navy (N) and 60 m white (W). Check the yarn label for washing instructions.
- Crochet hook: 4 mm, or the size needed to obtain gauge.
- Other supplies: Stitch markers, scissors and a tapestry needle.
Size and Fit
One sample size: approximately 27 cm wide à 69 cm long, including the border, at the stated gauge. The worked rectangle before its border is approximately 25.5 cm à 68 cm.
Gauge
16 sc and 18 rows = 10 cm in plain sc. Check gauge before beginning; a different gauge changes both finished dimensions.
Abbreviations
US crochet terms.
- ch = chain
- sc = single crochet
- st(s) = stitch(es)
- C, R, N, W = cream, red, navy and white yarn
Pattern
- How to read the colour chart Each numbered chart line represents 17 sc, viewed from the top of the soldier down to the feet. A number before a letter tells you how many consecutive sc to work in that colour: for example, 5C 7N 5C means five cream, seven navy, five cream. Every chart line totals 17 sts and is symmetrical, so it reads the same when worked in either direction. On every patterned row, work 12 cream sc, the specified 17 chart sts, then 12 cream sc: 41 sts altogether.
- Colour chart 1: 5C 7N 5C; 2: 4C 9N 4C; 3: 4C 2N 5R 2N 4C; 4: 4C 2N 5R 2N 4C; 5: 3C 11N 3C; 6: 5C 7W 5C; 7: 5C 2W 3N 2W 5C; 8: 5C 7W 5C; 9: 5C 2W 3N 2W 5C; 10: 5C 7W 5C; 11: 4C 9N 4C; 12: 3C 3R 5N 3R 3C; 13: 3C 3R 5N 3R 3C; 14: 3C 3R 2N 1W 2N 3R 3C; 15: 3C 3R 5N 3R 3C; 16: 3C 11R 3C; 17: 4C 9N 4C; 18: 4C 3N 3C 3N 4C; 19: 4C 3N 3C 3N 4C.
- Tapestry-crochet method Work flat in turned rows. Ch 1 to turn; it does not count as a st. Change colour on the final yarn-over of the sc before the new colour begins. Carry inactive contrast yarns inside the 17-st chart area, crocheting over them, but park them at the chart edge while working each 12-st cream margin. Continue with the cream working yarn through the margins and the chartâs cream sts. Introduce each contrast colour when it is first needed; cut and secure it after its last use in a panel. Use fresh contrast strands for the second panel.
- Foundation and first nutcracker With C, ch 42. Row 1: sc in the second ch from the hook and in each remaining ch, changing colours as required to work chart line 19 within the middle 17 sts; turn. (41 sts.) Rows 2â19: ch 1, work 12 C sc, then chart lines 18 down to 1 in order, then 12 C sc; turn after every row. (41 sts per row.) This places the first soldierâs head next to the centre section.
- Plain centre Rows 20â103: ch 1, sc in each of the 41 sts with C; turn after every row. Work 84 plain rows.
- Second nutcracker Rows 104â122: ch 1, work 12 C sc, then chart lines 1 through 19 in order, then 12 C sc; turn after every row except the last. (41 sts per row.) The second soldierâs head is next to the centre section.
- Plain border After row 122, do not turn. With C, ch 1 and work one round of sc around the rectangle. Work 3 sc in each corner: use the four outer corner stitches or their corresponding foundation-chain positions. Between corners, work 39 sc across each short edge and 120 sc along each long edge, placing one sc in each side row-end except the corner row-ends. Join with a slip stitch to the first sc. (330 border sts.) Fasten off.
Finishing
- Weave in ends securely, taking care that no contrasting tails show through the cream margins.
- Wash according to the yarn label. Lay flat and gently shape the rectangle while drying.
Helpful Tips
- Mark the boundaries of the middle 17 sts so the cream margins stay 12 sts wide.
- Keep carried yarns relaxed inside the chart area; tight floats can pull the runner out of shape.
- For a different length without changing the end panels, add or remove plain centre rows. At the stated gauge, 18 rows change the length by approximately 10 cm before considering the unchanged border.
Modular Nutcracker Wall Hanging

This nutcracker turns a familiar Christmas character into a flat wall hanging. Its tall navy hat, cream face and long red coat create a bold portrait without the bulk of a stuffed decoration, making it a good choice for a door or an open stretch of wall.
The design is built from simple geometric pieces, while the tapered beard and embroidered features give the soldier his character. It is an intermediate project chiefly because the separate pieces need careful positioning: keeping the hat, face and coat on a shared centre line helps the finished portrait look balanced.
If you enjoy Christmas crochet projects that can come out year after year, this one offers plenty of decorative impact without a complicated silhouette. The straight arms and even lower edge give it a tidy, graphic look that sits comfortably alongside other handmade Christmas decorations.
Modular Nutcracker Wall Hanging

Quick-reference card. Follow the complete written instructions below.
Materials
- Aran-weight cotton yarn: Approximately 150 g for the backing, 100 g red, 50 g navy, 30 g cream and 30 g white, plus small amounts of black and gold for embroidery. Quantities are estimates.
- Crochet hook: 4 mm, or the size needed to obtain gauge
- Dowel: 35â38 cm long and approximately 8â10 mm in diameter
- Other supplies: Yarn needle, scissors, stitch markers, tape measure and cord for hanging
Size and Fit
One size. The backing is approximately 30 cm wide à 40 cm long at the stated gauge, excluding the dowel and hanging cord. Panel positions are given by backing columns counted from the left and rows counted down from the top, with the right side facing. Crocheted fabric may vary slightly in size.
Gauge
16 sc and 20 rows = 10 cm in flat single crochet. Check gauge before making the backing; matching gauge keeps the panels and placement measurements consistent.
Abbreviations
US crochet terms.
- ch = chain
- sc = single crochet
- sc2tog = single crochet two stitches together
- RS = right side
- WS = wrong side
Pattern
- Working the rectangles For each separate rectangle, ch one more than its stated stitch width. Row 1: sc in the second ch from the hook and in each ch across. Ch 1 and turn. On every remaining row, sc in each stitch across, then ch 1 and turn unless it is the final row. Turning chains do not count as stitches. Fasten off, leaving a long tail on panels that will be sewn down.
- Backing With the backing colour, ch 49. Work a rectangle 48 sc wide for 80 rows. Do not fasten off after row 80. This last row is the top edge; when viewing the RS with that edge at the top, count backing rows downwards from it.
- Top sleeve Continuing from the top edge of the backing, ch 1 and turn. Work 48 sc across for each of 8 sleeve rows. Fasten off. Fold the sleeve to the WS and sew its free long edge to the WS of the backing approximately 8 backing rows below the top. Keep the short ends open and avoid stitching through to the front. Check that the dowel slides through the sleeve.
- Torso and arms In red, make one torso rectangle 28 sc wide à 36 rows long and two arm rectangles, each 6 sc wide à 30 rows long. The arms are straight panels; they do not need shaping.
- Hat, brim and face In navy, make one hat rectangle 28 sc wide à 18 rows long and one brim rectangle 32 sc wide à 4 rows long. In cream, make one face rectangle 20 sc wide à 18 rows long.
- Belt In navy, make one rectangle 28 sc wide à 4 rows long.
- Tapered beard In white, ch 15. Row 1: sc in the second ch from the hook and across (14 sc). Rows 2â4: sc across (14 sc). Row 5: sc2tog, sc 10, sc2tog (12 sc). Row 6: sc across. Row 7: sc2tog, sc 8, sc2tog (10 sc). Row 8: sc across. Row 9: sc2tog, sc 6, sc2tog (8 sc). Row 10: sc across. Row 11: sc2tog, sc 4, sc2tog (6 sc). Row 12: sc across. Ch 1 and turn between rows; the turning chain does not count as a stitch. Fasten off with a sewing tail.
- Lay out the portrait Lay the backing RS up with its sleeve at the top. Use the backing’s stitch columns and rows as a placement grid; align panel edges approximately with the indicated grid lines. Place the hat over columns 11â38 and rows 5â22. Place the face over columns 15â34 and rows 23â40. Place the torso over columns 11â38 and rows 41â76. Place the left arm over columns 5â10 and rows 41â70, and the right arm over columns 39â44 and rows 41â70. The torso ends four backing rows above the bottom edge, leaving an even lower border.
- Seam and layer the details Sew down the hat, face, torso and arms with matching yarn, keeping the backing flat. Centre the brim over columns 9â40 and rows 19â22 so it covers the bottom of the hat; sew it in place. Sew the belt over the torso at columns 11â38 and rows 65â68. Centre the beard with its 14-stitch top edge over columns 18â31 at backing row 41. Sew down its sides and tapered lower edge through row 52, keeping its centre aligned with the face. Secure all panel corners.
- Embroider the features With black yarn, embroider two small eyes on the face, approximately five stitches in from each side and nine face rows below its top. Add a short central nose and a moustache near the lower edge of the face, above the beard. With gold yarn, embroider two coat buttons below the beard and above the belt, and a small square buckle at the belt’s centre. Keep embroidery stitches on the front so they do not catch the sleeve.
Finishing
- Weave in ends on the WS. Gently block the hanging flat to the stated backing dimensions, keeping the lower edge straight, and allow it to dry.
- Slide the dowel through the open sleeve. Tie the ends of a length of hanging cord securely to opposite exposed ends of the dowel.
- Hang from a suitable fixing and adjust the cord until the portrait hangs level.
Helpful Tips
- Use firm, even stitches for panels that hold their rectangular shape without curling excessively.
- Pin every panel in place before sewing. Check the face, hat and coat share the same centre line.
- If the sleeve is tight on the chosen dowel, sew its lower edge slightly closer to the top of the backing to leave a roomier channel.
Nutcracker Storage Basket

This nutcracker basket gives small Christmas supplies a festive home without taking over a shelf or craft table. Its upright shape is best suited to light, dry items such as gift tags, ribbon and little decorations rather than anything heavy.
The soldierâs face appears on one side, so the basket can sit among other Christmas decorations while remaining useful. A pointed white beard and dark, hat-like rim give it a recognisable nutcracker look without closing off the opening.
A firm fabric matters for this project: if it feels loose as you work, the sides may struggle to stand upright. The pattern below keeps the decorative details on the outside so the interior remains practical for storage.
Nutcracker Storage Basket

Quick-reference card. Follow the complete written instructions below.
Materials
- Bulky cotton yarn: Approximately 90 m red, 65 m cream, 35 m dark brown or black, and 12 m white. Alternatively, hold two strands of DK cotton together; allow the stated length for each strand.
- Crochet hook: 5 mm, or a size that produces a firm fabric without large gaps.
- Other supplies: Stitch marker, yarn needle and a small amount of black yarn for facial details.
Size and Fit
One sample size: approximately 12â13 cm across the base and 9â10 cm high after folding the rim. The basket has a 48-stitch opening. Finished dimensions depend on your gauge.
Gauge
Approximately 12 sc and 13 rounds per 10 cm in firmly worked sc. An exact gauge is less important than a dense fabric that holds its shape.
Abbreviations
US crochet terms.
- ch = chain
- sc = single crochet
- sc2tog = single crochet two stitches together
- sl st = slip stitch
- BLO = back loop only
- inc = work 2 sc in the same stitch
Pattern
- Working method Work the basket in joined rounds. At the end of each round, sl st to the first sc; ch 1 to begin the next round. The joining sl st and beginning ch 1 do not count as stitches. Place a marker in the first sc and do not work into the joining sl st.
- Base, rounds 1â2 With red, make a magic ring. Round 1: Work 6 sc in the ring and pull it closed. (6) Round 2: Inc in each stitch. (12)
- Base, rounds 3â8 Round 3: (Sc 1, inc) 6 times. (18) Round 4: (Sc 2, inc) 6 times. (24) Round 5: (Sc 3, inc) 6 times. (30) Round 6: (Sc 4, inc) 6 times. (36) Round 7: (Sc 5, inc) 6 times. (42) Round 8: (Sc 6, inc) 6 times. (48)
- Red sides, rounds 9â13 Round 9: Sc BLO in each stitch. (48) Rounds 10â13: Sc in both loops of each stitch. (48 each round) Keep these rounds firm to form straight sides.
- Face and rim, rounds 14â23 Change to cream for rounds 14â20; sc in each stitch around on every round. (48 each round) Change to dark brown or black for rounds 21â23; sc in each stitch around on every round. (48 each round) Fasten off, leaving a tail long enough to secure the rim.
- Beard With white, ch 9. Row 1: Sc in the second ch from the hook and each remaining ch. (8) Ch 1 and turn after each row; the turning ch does not count as a stitch. Row 2: Sc across. (8) Row 3: Sc2tog, sc 4, sc2tog. (6) Row 4: Sc2tog, sc 2, sc2tog. (4) Row 5: Sc2tog twice. (2) Fasten off, leaving a long sewing tail.
- Folded hat rim Fold the three dark rounds down over the outside of the basket, leaving the opening unobstructed. The free edge should sit near cream round 18. Use the dark yarn tail to tack that edge to the outer surface at several points around the basket. Catch outer strands rather than stitching right through the wall, so the inside stays smooth.
- Soldierâs face With the round joins at the back, count the front-facing stitches from left to right as stitches 19â30. Sew the wide edge of the beard across approximately stitches 21â28 at round 15, with its point directed down towards round 11. Secure its edges flat without sewing through to the inside. Using short black yarn stitches, embroider an eye over each of stitches 22 and 27 at round 17. Embroider a small nose between stitches 24 and 25 at round 16, above the beard.
Finishing
- Weave in all ends on the outside beneath the beard or folded rim where possible, keeping the inside smooth.
- Ease the base into a flat circle and shape the sides upright by hand. Keep the folded rim clear of the opening.
Helpful Tips
- If the base ruffles, check that each increase round contains exactly six increases and try a smaller hook for a firmer fabric.
- This is an open basket for light, dry items, not a container for heavy objects or liquids.
- If using doubled DK cotton, hold both strands together for every stitch, including the beard.
Nutcracker Christmas Cracker Sleeve

Give a shop-bought Christmas cracker a nutcracker-inspired look without hiding its familiar shape. This reusable cover sits around the straight centre, while the twisted paper ends stay visible on both sides.
The little face, beard and hat make it a playful addition to a festive table setting. Because crackers vary in shape, the pattern is designed around the cracker you have rather than a fixed finished size.
This is a decorative sleeve, not part of the crackerâs pulling mechanism. A comfortable fit matters: it should sit neatly on the centre without gripping the paper.
Nutcracker Christmas Cracker Sleeve

Quick-reference card. Follow the complete written instructions below.
Materials
- DK cotton yarn: Red for the sleeve; small amounts of cream for the face, white for the beard, black for the hat and eyes, and gold for optional uniform lines.
- Crochet hook: 3.5 mm, or a size that makes a firm fabric without making the sleeve too tight.
- Other supplies: Tape measure, stitch marker, yarn needle, scissors and a shop-bought Christmas cracker for sizing.
Size and Fit
Made to measure. Measure the circumference of the crackerâs central barrel, the widest part of one twisted end that the sleeve must pass over, and the length of the straight central barrel. Calculate the starting chain for a circumference 0.5â1 cm greater than the larger circumference measurement. Work the tube to 1 cm less than the barrel length, leaving approximately 0.5 cm clear at each end. Choose a cracker with a barrel at least 7 cm long to leave room for the appliqués. As an illustration of the calculation, a cracker with an 8 cm barrel circumference, an 8.5 cm end circumference and a 9 cm barrel length calls for approximately a 9 cm circumference and an 8 cm sleeve. Try the tube over an end before adding details; it must slide on and off without force and sit on the barrel without covering either twist.
Gauge
Gauge determines the starting chain. Make a small single-crochet swatch with the chosen yarn and hook, then count stitches and rows across 10 cm without stretching. Multiply the number of stitches per centimetre by the target sleeve circumference and round up to a whole stitch for the starting chain. For example, at 20 stitches per 10 cm, a 9 cm target takes 18 chains. Measure the tube as you work to determine its length; the example is a sizing calculation, not a tested gauge.
Abbreviations
US crochet terms.
- ch = chain
- sc = single crochet
- sl st = slip stitch
- st(s) = stitch(es)
Pattern
- Plan the fit Measure the cracker and calculate the starting chain as described above; call that number N. Keep the cracker intact. Do not crochet around it or stitch into its paper. If a tube wide enough to pass over an end would be too loose on the barrel, choose a different cracker rather than making a sleeve that has to be forced on.
- Start the red tube With red, ch N. Join with a sl st in the first ch, taking care not to twist the chain. Round 1: Ch 1 (does not count as a st), sc in each ch around, then sl st in the first sc to join. You have N sc.
- Continue the tube Each following round: Ch 1 (does not count as a st), sc in each sc around, then sl st in the first sc to join. Keep N sc in every round. After a few rounds, check that the tube passes over a twisted end without force. Continue until it measures 1 cm less than the straight barrel length. Fasten off. Check again that it slides off easily and leaves both twists fully exposed.
- Cream face With cream, ch 7. Row 1: Sc in the second ch from the hook and in each remaining ch; 6 sc. Rows 2â4: Ch 1, turn, sc in each st; 6 sc. Fasten off, leaving a tail for sewing.
- White beard With white, ch 7. Row 1: Sc in the second ch from the hook and in each remaining ch; 6 sc. Row 2: Ch 1, turn, sc in each st; 6 sc. Fasten off, leaving a sewing tail.
- Black hat With black, ch 9. Row 1: Sc in the second ch from the hook and in each remaining ch; 8 sc. Row 2: Ch 1, turn, sc in each st; 8 sc. Fasten off, leaving a sewing tail.
- Add the nutcracker details With the sleeve off the cracker, lay it flat with the round join at the back. Centre the cream face on the front, with the beard touching its lower edge and the hat touching its upper edge. Leave the tube openings clear. Sew each piece to the crocheted tube only, keeping the stitches flat rather than pulling the tube closed. Embroider two small black eyes on the face. If desired, embroider short gold lines on the red area below the beard for uniform trim.
Finishing
- Weave in all ends on the inside of the sleeve, without joining its two layers or closing either opening.
- Slide the finished sleeve onto the crackerâs central barrel. Confirm that it slides off easily, neither twisted end is covered, and the appliqués do not catch on the paper.
- Remove the sleeve before pulling the cracker. Keep it for another suitably sized cracker.
Helpful Tips
- A firm cotton fabric helps the sleeve hold its shape; a tight fit does not. Allow enough clearance to pass over the end without tugging.
- Check the fit before sewing on the face. If the tube catches, remake it with a larger starting chain rather than pulling on the cracker.
- Keep embroidery and sewing tails on the crochet, never on the cracker.
Frequently Asked Questions
Which nutcracker project is a good place to start?
Try the flat appliqué or bookmark if you prefer not to work with stuffing or a shaped base. Both are marked confident beginner; check their finishing details before choosing.
How do I help a standing nutcracker stay upright?
Work the base to the patternâs instructions and check that it sits level before finishing the figure. The standing soldier calls for a reinforced base, so do not leave that step out.
What should I check before making a nutcracker ornament?
Check its finished size against your tree or display space. Attach the hanging loop securely and keep any stuffing light enough to preserve the ornamentâs shape.
Can I use a different yarn for a fitted project?
Yes, but check the size as you work. A yarn swap may change how the mug cosy fastens or whether the bottle cover and tree topper fit their intended objects.
Final Thoughts
Whether you want a small decoration or a larger Christmas project, start with the nutcrackerâs job: hanging, standing, wrapping or lying flat. That choice makes it easier to match the construction and finishing to the place it will be used.